Hyundai Creta 2019 Owner'S Manual Download Page 113

Page: 113 / 472

Opening the hood

1. Make sure the shift lever is in P

(Park, for automatic transaxle) or
first gear or R (Reverse, for manual
transaxle) and set the parking brake.

2. Pull the release lever to unlatch

the hood. The hood should pop
open slightly.

3. Go to the front of the vehicle, raise

the hood slightly, push the second-
ary latch up (1) inside of the hood
center and lift the hood (2).

4. Pull out the support rod.
5. Hold the hood opened with the

support rod.

3-28

Convenient features of your vehicle

OGS048170L

OGS045010L

OGC044014

Summary of Contents for Creta 2019

























































































































































































































































































































































































































































































Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands

Hyundai Creta 2019, Owner'S Manual

Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands