Hyundai Creta 2019 Owner'S Manual Download Page 135

Page: 135 / 472

3-50

Convenient features of your vehicle

Warning and indicator lights

Information -

Warning lights

Make sure that all warning lights are
OFF after starting the engine. If any
light is still ON, this indicates a situa-
tion that needs attention.

Air bag Warning Light
(if equipped)

This warning light illuminates:

• Once you set the ignition switch or

Engine Start/Stop button to the ON
position.
- It illuminates for approximately 6

seconds and then goes off.

• When there is a malfunction with

the SRS.
In this case, we recommend that
you have the vehicle inspected by
an authorized HYUNDAI dealer.

Seat Belt Warning Light

This warning light informs the driver
that the seat belt is not fastened.

For more details, refer to the “Seat
Belts” in chapter 2.

Parking Brake & Brake
Fluid Warning Light

This warning light illuminates:

• Once you set the ignition switch or

Engine Start/Stop button to the ON
position.
- It illuminates for approximately 3

seconds

- It remains on if the parking brake

is applied.

• When the parking brake is applied.
• When the brake fluid level in the

reservoir is low.
- If the warning light illuminates with

the parking brake released, it indi-
cates the brake fluid level is low.

Summary of Contents for Creta 2019

























































































































































































































































































































































































































































































Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands

Hyundai Creta 2019, Owner'S Manual

Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands