Hyundai Creta 2019 Owner'S Manual Download Page 228

Page: 228 / 472

4-14

Multimedia System

Radio

Radio Mode

Change Mode:

[RADIO]

button

• Plays Radio(FM/AM) mode. Each

time the button is pressed, the
radio mode popup will be displayed
or closed.

• The radio mode popup will not be

displayed when

[SETUP]

button

[Display]

[Mode popup] is turned

[Off].

Search Frequency:

[SEEK/TRACK]

button

Searches the previous/next broad-
cast frequencies.
• Shortly pressing the button:

Searches broadcast frequencies.

• Frequency is controlled by 1 step

quickly.

When the button is

released after pressing and hold-
ing, searches broadcast frequen-
cies.

Change Frequency:

TUNE

knob

Changes frequency by turning the
knob left/right. You can seek avail-
able frequencies manually.

Saved Frequency:

[1] ~ [6]

(Preset)

buttons

• Shortly pressing the button: Plays

the frequency saved in the corre-
sponding button.

• Pressing and holding the button

(more than 1.0 seconds): Saves
the currently playing broadcast to
the selected button and sound a
BEEP.

FM/AM Mode (with RDS)

FM/AM Mode

Displays Menu Popup when pressing
the

[MENU]

button.

Traffic announcement (for RDS
model)

TA(Traffic announcement) feature
On/Off.

Presets (for RDS model)

Displays saved presets.

Auto Store

• Saves broadcasts with superior

reception to

[1] ~ [6]

(Preset) buttons.

• If no frequencies are received,

then the most recently received
frequency will be broadcast.

Summary of Contents for Creta 2019

























































































































































































































































































































































































































































































Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands

Hyundai Creta 2019, Owner'S Manual

Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands