Hyundai Creta 2019 Owner'S Manual Download Page 223

Page: 223 / 472

4-9

Multimedia System

Feature of Your Audio

Head Unit

❈

The actual features in the vehicle
may differ from the illustration.

(1)

RADIO

• Plays Radio(FM/AM) mode.
• Each time the button is pressed,

the radio mode popup will be dis-
played or closed.

• The radio mode popup will not be

displayed when

[SETUP]

button

[Display]

[Mode popup] is turned

[Off].

(2)

MEDIA

• Plays Media(USB(iPod

), Bluetooth

(BT) Audio) mode.

• Each time the button is pressed,

the media mode popup will be dis-
played or closed.

• The media mode popup will not be

displayed when

[SETUP]

button

[Display]

[Mode popup] is turned

[Off].

(3)

PHONE

• Moves to Phone Screen.
• If Bluetooth

is not connected, dis-

plays Bluetooth

Pair/Connection

screen.

(4)

SEEK/TRACK

When pressed quickly
• Radio mode: Searches the previ-

ous/next available broadcast fre-
quency.

• Media mode: Changes the track,

file or title.

When pressed and held (more than
1.0 seconds)
• Radio mode: Frequency is con-

trolled by 1 step quickly. When the
button is released after pressing
and holding, searches the previ-
ous/next available broadcast fre-
quency.

• Media mode: Rewinds or fast-for-

wards the song.

(except

Bluetooth

(BT) Audio)

(5)

POWER/VOL

knob

• Power knob: Turns power On/Off

by pressing the knob.

• Volume knob: Sets volume by turn-

ing the knob left/right.

Summary of Contents for Creta 2019

























































































































































































































































































































































































































































































Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands

Hyundai Creta 2019, Owner'S Manual

Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands