Hyundai Creta 2019 Owner'S Manual Download Page 441

Page: 441 / 472

7-84

Maintenance

Outside light

1. Open the tailgate
2. Loosen the light assembly retain-

ing screws with a cross-tip screw-
driver.

3. Remove the rear combination light

assembly from the body of the
vehicle.

4. Remove the socket from the

assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.

5. Remove the bulb from the socket

by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.

Inside lamp

Back-up light/Tail light

1. Turn off the engine.
2. Open the tailgate.
3. Remove the service cover using a

flat-blade screwdriver.

OGC074046

Turn signal

Stop/Tail

Tail

Back up

OGC074026

OGC074027

OGC074028

OGS078110L

Summary of Contents for Creta 2019

























































































































































































































































































































































































































































































Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands

Hyundai Creta 2019, Owner'S Manual

Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands