Hyundai Creta 2019 Owner'S Manual Download Page 436

Page: 436 / 472

7-79

Maintenance

Headlight (Low/High)

1. Open the hood.
2. Remove the headlight bulb cover

by turning it counterclockwise.

3. Disconnect the headlight bulb

socket-connector.

4. Unsnap the headlight bulb retain-

ing wire by depressing the end
and pushing it upward.

5. Remove the bulb from the head-

light assembly.

6. Install a new headlight bulb and

snap the headlight bulb retaining
wire into position by aligning the
wire with the groove on the bulb.

7. Connect the headlight bulb socket

connector.

8. Install the headlight bulb cover by

turning it clockwise.

Turn signal light

1. Remove the turn signal light bulb

cover by turning it counterclock-
wise.

2. Remove the socket from the

assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.

3. Insert a new bulb by inserting it

into the socket and rotating it until
it locks into place.

4. Install the socket in the assembly

by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.

5. Install the turn signal light bulb

cover by turning it clockwise.

OGS075050

Turn signal light

Parking

(Position) light

Headlight

Summary of Contents for Creta 2019

























































































































































































































































































































































































































































































Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands

Hyundai Creta 2019, Owner'S Manual

Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands