Hyundai Creta 2019 Owner'S Manual Download Page 354

Page: 354 / 472

6-23

at to do in an emer

ency

When towing your vehicle in an
emergency without wheel dollies:
1. Place the ignition switch in the

ACC position.

2. Place the shift lever in N (Neutral).
3. Release the parking brake.

Failure to place the shift lever in N
(Neutral) when being towed with
the front wheels on the ground
can cause internal damage to the
transaxle.

Removable towing hook

NOTICE

OGC064010

OGS068020L

OGS068021L

■

Front

■

Rear

1. Open the trunk, and remove the

towing hook from the tool case.

2. Remove the hole cover pressing

the lower part of the cover on the
front bumper.

3. Install the towing hook by turning

it clockwise into the hole until it is
fully secured.

4. Remove the towing hook and

install the cover after use.

Summary of Contents for Creta 2019

























































































































































































































































































































































































































































































Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands

Hyundai Creta 2019, Owner'S Manual

Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands