Hyundai Creta 2019 Owner'S Manual Download Page 366

Page: 366 / 472

7-9

Maintenance

At least monthly:

• Check the coolant level in the

engine coolant reservoir.

• Check the operation of all exterior

lights, including the stoplights, turn
signals and hazard warning flash-
ers.

• Check the inflation pressures of all

tires including the spare.

At least twice a year
(i.e., every Spring and Fall):

• Check the radiator, heater and air

conditioning hoses for leaks or
damage.

• Check the windshield washer

spray and wiper operation. Clean
wiper blades with clean cloth
dampened with washer fluid.

• Check the headlight alignment.
• Check the muffler, exhaust pipes,

shields and clamps.

• Check the lap/shoulder belts for

wear and function.

• Check for worn tires and loose

wheel lug nuts.

At least once a year:

• Clean the body and door drain

holes.

• Lubricate the door hinges and

checks, and hood hinges.

• Lubricate the door and hood locks

and latches.

• Lubricate the door rubber weather-

strips.

• Check the air conditioning system.
• Inspect and lubricate automatic

transaxle linkage and controls.

• Clean the battery and terminals.
• Check the brake/clutch fluid level.

Summary of Contents for Creta 2019

























































































































































































































































































































































































































































































Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands

Hyundai Creta 2019, Owner'S Manual

Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands