Hyundai Creta 2019 Owner'S Manual Download Page 178

Page: 178 / 472

3-93

Con

enient f

atur

es of y

ur v

ehicle

Types of warning indicator and
sound

• If an object is in between sen-

sors or close to a sensor, the
displayed indicator may differ
from the above illustration.

• Do not wash the vehicle's sen-

sor with high pressure water.

• When you shift into the R

(Reverse) position and one or
more of the below situation
occurs, this may indicate a mal-
function with the parking assist
system.

• You don't hear an audible warn-

ing sound or the buzzer sounds
intermittently.

If this occurs, we recommend
that the system be checked by
an authorized HYUNDAI dealer.

Non-operational conditions of
rear parking assist system

The rear parking assist system
may not operate normally when:

• Moisture is frozen to the sensor.
• The sensor is covered with dirt or

debris such as snow or ice, or the
sensor cover is blocked.

There is a possibility of a parking
assist system malfunction when:

• Driving on uneven road surfaces

such as unpaved roads, gravel,
bumps, or gradient.

• Objects generating excessive noise

such as vehicle horns, loud motor-
cycle engines, or truck air brakes
can interfere with the sensor.

• Heavy rain or water spray is present.
• Wireless transmitters or mobile

phones are present near the sensor.

• The sensor is covered with snow.
• Any non-factory equipment or acces-

sories have been installed, or if the
vehicle bumper height or sensor
installation has been modified.

NOTICE

Distance from

object

Warning

indicator

Warning

sound

120cm ~ 61cm
(47 in. ~ 24 in.)

Buzzer beeps

intermittently.

60cm ~ 31cm
(24 in. ~ 12 in.)

Buzzer beeps

more frequently.

Less than
30 cm (12 in.)

Buzzer beeps

continuously.

(blinks)

•

is displayed. (if equipped)

Summary of Contents for Creta 2019

























































































































































































































































































































































































































































































Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands

Hyundai Creta 2019, Owner'S Manual

Search results

Summary of Contents for Creta 2019

Reviews:

Related manuals for Creta 2019

Brands by name

Popular brands