manualshive.com logo in svg

Hyundai 2010 ELANTRA TOURING, Owner'S Manual

The Hyundai 2010 ELANTRA TOURING Owner's Manual is now available for free download on our website. This comprehensive manual provides essential information for owners of this remarkable vehicle. Discover the key features, maintenance guidelines, and operational instructions to fully maximize your driving experience. Access it today at manualshive.com.

Share
Download
background image

Maintenance

40

7

G201005AUN

5. Maximum permissible inflation

pressure

This number is the greatest amount
of air pressure that should be put in
the tire. Do not exceed the maximum
permissible inflation pressure. Refer
to the Tire and Loading Information
label for recommended inflation
pressure.

G201006AUN

6. Maximum load rating

This number indicates the maximum
load in kilograms and pounds that
can be carried by the tire. When
replacing the tires on the vehicle,
always use a tire that has the same
load rating as the factory installed
tire.

G201007AUN

7. Uniform tire quality grading 

Quality grades can be found where
applicable on the tire sidewall
between tread shoulder and maxi-
mum section width.
For example:
TREADWEAR 200
TRACTION AA
TEMPERATURE A

Tread wear

The tread wear grade is a compara-
tive rating based on the wear rate of
the tire when tested under controlled
conditions on a specified govern-
ment test course. For example, a tire
graded 150 would wear one-and-a-
half times (1½) as well on the gov-
ernment course as a tire graded 100.
The relative performance of tires
depends upon the actual conditions
of their use, however, and may
depart significantly from the norm
because of variations in driving
habits, service practices and differ-
ences in road characteristics and cli-
mate.

These grades are molded on the
side-walls of passenger vehicle tires.
The tires available as standard or
optional equipment on your vehicles
may vary with respect to grade.

Traction - AA, A, B & C 

The traction grades, from highest to
lowest, are AA, A, B and C. Those
grades represent the tires ability to
stop on wet pavement as measured
under controlled conditions on spec-
ified government test surfaces of
asphalt and concrete. A tire marked
C may have poor traction perform-
ance.

WARNING 

The traction grade assigned to
this tire is based on straight-
ahead braking traction tests,
and does not include accelera-
tion, cornering, hydroplaning,
or peak traction characteristics.

Summary of Contents for 2010 ELANTRA TOURING














































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 ELANTRA TOURING

Accel 2020 Installation Instructions preview
2020
Brand: Accel Pages: 2
Jacob Jensen Electronic Parking Disc II User Manual preview
Electronic Parking Disc II
Brand: Jacob Jensen Pages: 28
Paccar DAF POWERCHOICE 250A Installation Manual preview
DAF POWERCHOICE 250A
Brand: Paccar Pages: 20
PAC GM1A-R Quick Start Manual preview
GM1A-R
Brand: PAC Pages: 4
Jaeger J05252127 Fitting Instructions Manual preview
J05252127
Brand: Jaeger Pages: 17
Mercedes-Benz 2016 SLK Operator'S Manual preview
2016 SLK
Brand: Mercedes-Benz Pages: 358
Volvo B13R Driver'S Handbook Manual preview
B13R
Brand: Volvo Pages: 24
Ecco 5545A Installation And Operating Instructions Manual preview
5545A
Brand: Ecco Pages: 12
M7 SPEED AGS-R2 Manual preview
AGS-R2
Brand: M7 SPEED Pages: 6
Meta System 900000358 Installation Technical Sheet preview
900000358
Brand: Meta System Pages: 22
Saab 9000 1985 Service Manual preview
9000 1985
Brand: Saab Pages: 92
A-rival PNC70 Active Hardware Manual preview
PNC70 Active
Brand: A-rival Pages: 23
EUFAB 11512 Manual preview
11512
Brand: EUFAB Pages: 4
Hama 00173884 Operating Instructions Manual preview
00173884
Brand: Hama Pages: 13
Volvo Ski box Installation Instructions Manual preview
Ski box
Brand: Volvo Pages: 7
Stanley GLPS Instruction Manual preview
GLPS
Brand: Stanley Pages: 6
Gator ARV50T User Manual preview
ARV50T
Brand: Gator Pages: 18
Air Lift 75524 Installation Manual preview
75524
Brand: Air Lift Pages: 24

Brands by name

Popular brands

Load more brands