manualshive.com logo in svg

Hyundai 2010 ELANTRA TOURING, Owner'S Manual

The Hyundai 2010 ELANTRA TOURING Owner's Manual is now available for free download on our website. This comprehensive manual provides essential information for owners of this remarkable vehicle. Discover the key features, maintenance guidelines, and operational instructions to fully maximize your driving experience. Access it today at manualshive.com.

Share
Download
background image

Driving your vehicle

36

5

E120000AUN

More severe winter weather conditions
result in greater wear and other prob-
lems. To minimize winter driving prob-
lems, you should follow these sugges-
tions:

E120100AUN

Snowy or Icy conditions

To drive your vehicle in deep snow, it may
be necessary to use snow tires or to
install tire chains on your tires. If snow
tires are needed, it is necessary to select
tires equivalent in size and type of the
original equipment tires. Failure to do so
may adversely affect the safety and han-
dling of your car. Furthermore, speeding,
rapid acceleration, sudden brake appli-
cations, and sharp turns are potentially
very hazardous practices.

During deceleration, use engine braking
to the fullest extent. Sudden brake appli-
cations on snowy or icy roads may cause
skids to occur. You need to keep suffi-
cient distance between the vehicle in
operation in front and your vehicle. Also,
apply the brake gently. It should be noted
that installing tire chains on the tire will
provide a greater driving force, but will
not prevent side skids.

✽

✽

NOTICE

Tire chains are not legal in all countries.
Check the country laws before fitting
tire chains.

E120101AUN

Snow tires  

If you mount snow tires on your vehicle,
make sure they are radial tires of the
same size and load range as the original
tires. Mount snow tires on all four wheels
to balance your vehicle’s handling in all
weather conditions. Keep in mind that the
traction provided by snow tires on dry
roads may not be as high as your vehi-
cle's original equipment tires. You should
drive cautiously even when the roads are
clear. Check with the tire dealer for max-
imum speed recommendations.

Do not install studded tires without first
checking local, state and municipal regu-
lations for possible restrictions against
their use.

WINTER DRIVING

WARNING

- Snow tire size

Snow tires should be equivalent in
size and type to the vehicle's stan-
dard tires. Otherwise, the safety
and handling of your vehicle may
be adversely affected.

1VQA3005

Summary of Contents for 2010 ELANTRA TOURING














































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 ELANTRA TOURING

Mobis G4211ADE00AL Installation Instructions Manual preview
G4211ADE00AL
Brand: Mobis Pages: 16
Subaru starlink Manual preview
starlink
Brand: Subaru Pages: 216
Alfa Romeo FIX&GO automatic Manual preview
FIX&GO automatic
Brand: Alfa Romeo Pages: 40
EUFAB 11556 Operating Instructions Manual preview
11556
Brand: EUFAB Pages: 52
Wagan Road Ready Seat Protector User Manual preview
Road Ready Seat Protector
Brand: Wagan Pages: 12
Chevrolet 2016 Suburban Owner'S Manual preview
2016 Suburban
Brand: Chevrolet Pages: 50
Nav TV PCM3CAM Install Manual preview
PCM3CAM
Brand: Nav TV Pages: 4
SuperATV Roof Installation Instructions Manual preview
Roof
Brand: SuperATV Pages: 7
Unex OBU-352EC Quick Start Manual preview
OBU-352EC
Brand: Unex Pages: 30
Linear Logic scangauge2 Quick Start Manual preview
scangauge2
Brand: Linear Logic Pages: 8
v.link VL2-DVD900 Manual preview
VL2-DVD900
Brand: v.link Pages: 19
Metra Electronics 99-9302 Installation Instructions Manual preview
99-9302
Brand: Metra Electronics Pages: 8
Honda Civic Hatch 2017 Owner'S Manual preview
Civic Hatch 2017
Brand: Honda Pages: 687
Safe Fleet RVS-218629 Instruction Manual preview
RVS-218629
Brand: Safe Fleet Pages: 28
Alfa Romeo Stelvio 2019 User Manual preview
Stelvio 2019
Brand: Alfa Romeo Pages: 268
Kia 2015 Soul Features & Functions Manual preview
2015 Soul
Brand: Kia Pages: 46
Directed 933.SUBARU1 Installation Manual preview
933.SUBARU1
Brand: Directed Pages: 24
Technaxx FMT1200BT User Manual preview
FMT1200BT
Brand: Technaxx Pages: 59

Brands by name

Popular brands

Load more brands