Hyundai 2010 ELANTRA TOURING Owner'S Manual Download Page 256 | Manualshive

Page: 256 / 397

background image

5 17

Driving your vehicle

E070102AUN

Disc brakes wear indicator

Your vehicle has disc brakes.
When your brake pads are worn and new
pads are required, you will hear a high-
pitched warning sound from your front
brakes or rear brakes (if equipped). You
may hear this sound come and go or it
may occur whenever you depress the
brake pedal.
Please remember that some driving con-
ditions or climates may cause a brake
squeal when you first apply (or lightly
apply) the brakes. This is normal and
does not indicate a problem with your
brakes.

Parking brake

E070201AFD

Applying the parking brake

To engage the parking brake, first apply
the foot brake and then without pressing
the release button in, pull the parking
brake lever up as far as possible. In addi-
tion it is recommended that when parking
the vehicle on a gradient, the shift lever
should be positioned in the appropriate
low gear on manual transaxle vehicles or
in the P (Park) position on automatic
transaxle vehicles.

WARNING

- Brake wear

This brake wear warning sound
means your vehicle needs service.
If you ignore this audible warning,
you will eventually lose braking
performance, which could lead to a
serious accident.

CAUTION

• To avoid costly brake repairs, do

not continue to drive with worn
brake pads.

• Always replace brake pads as

complete front or rear axle sets.

CAUTION

Driving with the parking brake
applied will cause excessive brake
pad and brake rotor wear.

OFD057006

«
...
254
255
256
257
258
...
»

Summary of Contents for 2010 ELANTRA TOURING














































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 ELANTRA TOURING

Brand: VEAP SHIELD UNITED Pages: 3

Brand: Vauxhall Pages: 2

BLACK STEEL S2560

Brand: Fab Fours Pages: 9

Brand: Toyota Pages: 56

PICASSO XSARA DESIRE 1.6 - MESUREMENT

Brand: CITROEN Pages: 2

Brand: Yakima Pages: 8

Brand: Kargo Master Pages: 6

Brand: Alfa Romeo Pages: 8

Brand: Honda Pages: 4

SAFESTOP SS0005

Brand: Pro-gard Pages: 4

Brand: GMC Pages: 120

Brand: Prime Tech Pages: 6

Brand: Park-Daddy Pages: 22

Brand: Skoda Pages: 281

Brand: Pacbrake Pages: 6

Brand: Sagem Pages: 10

Brand: Elinchrom Pages: 101

Brand: Rugged Ridge Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands