Hyundai 2010 ELANTRA TOURING Owner'S Manual Download Page 101

Page: 101 / 397

4 25

Features of your vehicle

D110300AEN

Sunshade

The sunshade will automatically open
with the glass panel when the glass
panel moves. Close it manually if you
want it closed.

OUN026031

WARNING -

Sunroof

• Be careful that no heads, hands

and body parts are obstructing a
closing sunroof.

• Do not extend the face, neck,

arms or body outside the sunroof
while driving.

• Make sure your hands and head

are safely out of the way before
closing a sunroof.

CAUTION

• Periodically remove any dirt that

may accumulate on the guide rail.

• If you try to open the sunroof

when the temperature is below
freezing or when the sunroof is
covered with snow or ice, the
glass or the motor could be dam-
aged.

• The sunroof is made to slide

together with the sunshade. Do
not leave the sunshade closed
while the sunroof is open.

Summary of Contents for 2010 ELANTRA TOURING














































































































































































































































































































































































































Search results

Summary of Contents for 2010 ELANTRA TOURING

Reviews:

Related manuals for 2010 ELANTRA TOURING

Brands by name

Popular brands

Hyundai 2010 ELANTRA TOURING, Owner'S Manual

Search results

Summary of Contents for 2010 ELANTRA TOURING

Reviews:

Related manuals for 2010 ELANTRA TOURING

Brands by name

Popular brands