manualshive.com logo in svg

Hyundai 2010 ELANTRA TOURING, Owner'S Manual, Page: 121 / 397

Share
Download
Hyundai 2010 ELANTRA TOURING Owner'S Manual Download Page 121

4 45

Features of your vehicle

If the driver's seat belt is buckled while
unbuckled, the seat belt warning light
and chime will stop immediately

D150305AFD

Turn signal indicator lights

The blinking green arrows on the instru-
ment panel show the direction indicated
by the turn signals. If the arrow comes on
but does not blink, blinks more rapidly
than normal, or does not illuminate at all,
a malfunction in the turn signal system is
indicated. Your dealer should be consult-
ed for repairs.
This indicator also blinks when the haz-
ard warning switch is turned on.

D150306AUN

High beam indicator 

This indicator illuminates when the head-
lights are on and in the high beam posi-
tion or when the turn signal lever is pulled
into the Flash-to-Pass position.

D150307AFD

Engine oil pressure warn-
ing  

This warning light indicates the engine oil
pressure is low.
If the warning light illuminates while driv-
ing:
1. Drive safely to the side of the road and

stop.

2. With the engine off, check the engine

oil level. If the level is low, add oil as
required.

If the warning light remains on after
adding oil or if oil is not available, call an
authorized HYUNDAI dealer.

CAUTION

If the engine is not stopped imme-
diately after the engine oil pressure
warning light is illuminated, severe
damage could result.

Conditions

Warning Pattern

Unbuckled

6 seconds

Buckled

6 seconds

6 sec. on / 24 sec. off

(11 times)

Seat Belt

Buckled 

→

Unbuckled

Unbuckled

Vehicle

Speed

Below 3 mph

(5 km/h)

3 mph~6 mph

Above 6 mph

(10 km/h)

Above 6 mph

(10 km/h)

↓

Below 3 mph

(5 km/h)

6 sec. on / 24 sec. off

(11 times)

↓

Stop

Light-Blink

6 seconds

None

6 seconds

None

Chime-

Sound

Summary of Contents for 2010 ELANTRA TOURING














































































































































































































































































































































































































Reviews:

No comments