manualshive.com logo in svg

Hyundai 2010 ELANTRA TOURING, Owner'S Manual, Page: 158 / 397

Share
Download
Hyundai 2010 ELANTRA TOURING Owner'S Manual Download Page 158

Features of your vehicle

82

4

D250000AUN

• For maximum defrosting, set the temper-

ature control to the extreme right/hot posi-
tion and the fan speed control to the high-
est speed.

• If warm air to the floor is desired while

defrosting or defogging, set the mode to
the floor-defrost position.

• Before driving, clear all snow and ice from

the windshield, rear window, outside rear
view mirrors, and all side windows.

• Clear all snow and ice from the hood and

air inlet in the cowl grill to improve heater
and defroster efficiency and to reduce the
probability of fogging up the inside of the
windshield.

Manual climate control system

D250101AFD-EU

To defog inside windshield  

1. Select desired fan speed.
2. Select desired temperature.
3. Select 

the or position.

4. The outside (fresh) air and air condi-

tioning will be selected automatically.

If the air-conditioning and outside (fresh)
air position are not selected automatical-
ly, press the corresponding button manu-
ally.

D250102AFD

To defrost outside windshield  

1. Set the fan speed to the highest posi-

tion.

2. Set the temperature to the extreme hot

position.

3. Select the 

position.

4. The outside (fresh) air and air condi-

tioning will be selected automatically.

WINDSHIELD DEFROSTING AND DEFOGGING

OFD049115N

WARNING 

- Windshield

heating 

Do not use the 

or 

position

during cooling operation in
extremely humid weather. The dif-
ference between the temperature of
the outside air and that of the wind-
shield could cause the outer sur-
face of the windshield to fog up,
causing loss of visibility. In this
case, set the mode selection knob
or button to the 

position and

fan speed control knob or button to
a lower speed.

OFD049116N

Summary of Contents for 2010 ELANTRA TOURING














































































































































































































































































































































































































Reviews:

No comments