Hyundai 2010 ELANTRA TOURING Owner'S Manual Download Page 34 | Manualshive

Page: 34 / 397

Hyundai 2010 ELANTRA TOURING Owner'S Manual Download Page 34

3 17

Safety features of your vehicle

When using the rear center seat belt, the
buckle with the “CENTER” mark must be
used.

To release the seat belt:

The seat belt is released by pressing the
release button (1) in the locking buckle.
When it is released, the belt should auto-
matically draw back into the retractor.
If this does not happen, check the belt to
be sure it is not twisted, then try again.

C020104AUN

3-point rear center seat belt
(if equipped)

To fasten the rear center seat belt:

1. Pull the webbing slowly out from the

retractor on the top of the seatback to
connect the rear center belt.

OFD037056

B210A01NF

1

OFD037053

CAUTION

- Cargo

Be sure that cargo is securely
loaded in the rear cargo area.
Failing to do so may cause damage
to the rear center seat belt in sud-
den stops or collisions.

«
...
32
33
34
35
36
...
»

Summary of Contents for 2010 ELANTRA TOURING














































































































































































































































































































































































































Reviews:

No comments