Hyundai 2010 ELANTRA TOURING Owner'S Manual Download Page 321

Page: 321 / 397

Maintenance

G030103AUN

At least monthly:

• Check coolant level in the engine

coolant reservoir.

• Check the operation of all exterior

lights, including the stoplights, turn sig-
nals and hazard warning flashers.

• Check the inflation pressures of all

tires including the spare.

G030104AUN

At least twice a year
(i.e., every Spring and Fall) :

• Check radiator, heater and air condi-

tioning hoses for leaks or damage.

• Check windshield washer spray and

wiper operation. Clean wiper blades
with clean cloth dampened with wash-
er fluid.

• Check headlight alignment.
• Check muffler, exhaust pipes, shields

and clamps.

• Check the lap/shoulder belts for wear

and function.

• Check for worn tires and loose wheel

lug nuts.

G030105AFD

At least once a year :

• Clean body and door drain holes.
• Lubricate door hinges and checks, and

hood hinges.

• Lubricate door and hood locks and

latches.

• Lubricate door rubber weatherstrips.
• Check the air conditioning system.
• Inspect and lubricate automatic

transaxle linkage and controls.

• Clean battery and terminals.
• Check the brake (and clutch) fluid

level.

Summary of Contents for 2010 ELANTRA TOURING














































































































































































































































































































































































































Search results

Summary of Contents for 2010 ELANTRA TOURING

Reviews:

Related manuals for 2010 ELANTRA TOURING

Brands by name

Popular brands

Hyundai 2010 ELANTRA TOURING, Owner'S Manual

Search results

Summary of Contents for 2010 ELANTRA TOURING

Reviews:

Related manuals for 2010 ELANTRA TOURING

Brands by name

Popular brands