manualshive.com logo in svg

Hyundai 2010 ELANTRA TOURING, Owner'S Manual

The Hyundai 2010 ELANTRA TOURING Owner's Manual is now available for free download on our website. This comprehensive manual provides essential information for owners of this remarkable vehicle. Discover the key features, maintenance guidelines, and operational instructions to fully maximize your driving experience. Access it today at manualshive.com.

Share
Download
background image

5 39

Driving your vehicle

E120600AUN

To keep locks from freezing

To keep the locks from freezing, squirt an
approved de-icer fluid or glycerine into
the key opening. If a lock is covered with
ice, squirt it with an approved de-icing
fluid to remove the ice. If the lock is
frozen internally, you may be able to thaw
it out by using a heated key. Handle the
heated key with care to avoid injury.

E120700AFD

Use approved window washer
anti-freeze in system

To keep the water in the window washer
system from freezing, add an approved
window washer anti-freeze solution in
accordance with instructions on the con-
tainer. Window washer anti-freeze is
available from an authorized HYUNDAI
dealer and most auto parts outlets. Do
not use engine coolant or other types of
anti-freeze as these may damage the
paint finish.

E120800AUN

Don't let your parking brake
freeze

Under some conditions your parking
brake can freeze in the engaged position.
This is most likely to happen when there
is an accumulation of snow or ice around
or near the rear brakes or if the brakes
are wet. If there is a risk the parking
brake may freeze, apply it only temporar-
ily while you put the gear selector lever in
P (automatic transaxle) or in first or
reverse gear (manual transaxle) and
block the rear wheels so the car cannot
roll. Then release the parking brake.

E120900AUN

Don't let ice and snow accumu-
late underneath

Under some conditions, snow and ice
can build up under the fenders and inter-
fere with the steering. When driving in
severe winter conditions where this may
happen, you should periodically check
underneath the car to be sure the move-
ment of the front wheels and the steering
components is not obstructed.

E121000AUN

Carry emergency equipment

Depending on the severity of the weath-
er where you drive your car, you should
carry appropriate emergency equipment.
Some of the items you may want to carry
include tire chains, tow straps or chains,
flashlight, emergency flares, sand, a
shovel, jumper cables, a window scraper,
gloves, ground cloth, coveralls, a blanket,
etc.

Summary of Contents for 2010 ELANTRA TOURING














































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 ELANTRA TOURING

Fass Titanium Series Installation Manual preview
Titanium Series
Brand: Fass Pages: 13
Napoli NPL-TV 7874 DIGITAL Instruction Manual preview
NPL-TV 7874 DIGITAL
Brand: Napoli Pages: 20
GATmatic TWC-562S Installation, Operation & Maintenance Manual preview
TWC-562S
Brand: GATmatic Pages: 13
Ford Focus ST 2018 Supplement Manual preview
Focus ST 2018
Brand: Ford Pages: 38
Volvo 2004 V70 (Swedish) Användarmanual preview
2004 V70
Brand: Volvo Pages: 188
Yescom YES5062 User Manual preview
YES5062
Brand: Yescom Pages: 4
Z Automotive Tazer DT User Manual preview
Tazer DT
Brand: Z Automotive Pages: 16
Saleen 10-8002-C11670C Manual preview
10-8002-C11670C
Brand: Saleen Pages: 17
StowAway 2 025.41 Assembly Instructions preview
025.41
Brand: StowAway 2 Pages: 2
Dakota Digital LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne... Installation Instructions preview
LED Tail Lights for 1959 Chevrolet Impala, Bel Air, Biscayne...
Brand: Dakota Digital Pages: 3
TATA Motors Sumo Victa EX Owner'S Manual & Service Book preview
Sumo Victa EX
Brand: TATA Motors Pages: 92
NanoCam Plus NCP-MIRDVR522 User Manual preview
NCP-MIRDVR522
Brand: NanoCam Plus Pages: 32
Pacbrake HP10098 Installation Manual preview
HP10098
Brand: Pacbrake Pages: 6
Saab 32 025 603 Installation Instructions Manual preview
32 025 603
Brand: Saab Pages: 15
rough country RCH5100 Installation Instructions preview
RCH5100
Brand: rough country Pages: 4
Volvo S40 2001 Owner'S Manual preview
S40 2001
Brand: Volvo Pages: 197
Soundoff Signal nERGY ETSA200R-PA Quick Start Manual preview
nERGY ETSA200R-PA
Brand: Soundoff Signal Pages: 3
Truma Mover H SE User Manual preview
Mover H SE
Brand: Truma Pages: 10

Brands by name

Popular brands

Load more brands