Hyundai 2010 ELANTRA TOURING Owner'S Manual Download Page 102

Page: 102 / 397

Features of your vehicle

D110500BFD

Resetting the sunroof

Whenever the vehicle battery is discon-
nected or discharged, or related fuse is
blown, you must reset your sunroof sys-
tem as follows:

1. Turn the ignition switch to the ON

position and close the sunroof com-
pletely.

2. Release the control button.
3. Press and hold the close button until

the sunroof tilts and slightly moves up
and down. Then, release the button.

4. Press and hold the close button until

the sunroof is operated as follows;

TILT DOWN

→

SLIDE OPEN

→

SLIDE CLOSE

Then, release the control button.

When this is complete, the sunroof sys-
tem is reset.

❈

For more detailed information, contact
an authorized HYUNDAI dealer.

CAUTION

If the sunroof is not reset when the
vehicle battery is disconnected or
discharged, or related fuse is
blown, the sunroof may operate
improperly.

Summary of Contents for 2010 ELANTRA TOURING














































































































































































































































































































































































































Search results

Summary of Contents for 2010 ELANTRA TOURING

Reviews:

Related manuals for 2010 ELANTRA TOURING

Brands by name

Popular brands

Hyundai 2010 ELANTRA TOURING, Owner'S Manual

Search results

Summary of Contents for 2010 ELANTRA TOURING

Reviews:

Related manuals for 2010 ELANTRA TOURING

Brands by name

Popular brands