manualshive.com logo in svg

Hyundai 2006 Azera, Owner'S Manual

Share
Download
Hyundai 2006 Azera Owner'S Manual Download Page 255

6

DO-IT-YOURSELF MAINTENANCE

18

HNF2165

!

5. Replace the air conditioner filter by lift-

ing it.

6. Installation is the reverse order of disas-

sembly.

CAUTION:

To prevent pollutants from entering the
car, be sure to properly install the air
conditioner filter.

The parking brake pedal should be
checked periodically for proper stroke. If
you feel loose in the parking brake pedal
when the parking brake is engaged, have
your parking brake adjusted by an autho-
rized Hyundai dealer.

CHECKING PARKING
BRAKE PEDAL

G185A01TG-GAT

CAUTION:

If the parking brake pedal is not adjusted
properly, the vehicle may roll backwards
when parking on a steep hill.

!

4. Pull out the air conditioner filter with the

hooks on both sides pressed.

CAUTION:

Be careful not to press the hooks in the
opposite direction.

!

HNF2164

Summary of Contents for 2006 Azera




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands