manualshive.com logo in svg

Hyundai 2006 Azera, Owner'S Manual

Share
Download
Hyundai 2006 Azera Owner'S Manual Download Page 109

1

FEATURES OF YOUR HYUNDAI

95

B490A01TG-AAT

Interior Light

The interior courtesy light has two buttons.
The two buttons are:

o DOOR

In the "DOOR" position, the interior cour-
tesy light comes on when any door is
opened regardless of the ignition key po-
sition. The light goes out gradually after 30
seconds if the door is closed. However if
the ignition switch is ON or all doors are
locked, the interior light will turn off even
within 30 seconds.

B490A01TG

B485A01TG-GAT

Rear Map Light

Push in the map light switch to turn the light
on or off. This light produces a spot beam
for convenient use as a map light at night
or as a personal light for rear passengers.

B485A01TG

CAUTION:

Do not leave this button pressed for an
extended period of time when the ve-
hicle is not running.

!

o ON

In the "ON" position,  the light stays on at all
times.

Summary of Contents for 2006 Azera




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands