manualshive.com logo in svg

Hyundai 2006 Azera, Owner'S Manual

Share
Download
Hyundai 2006 Azera Owner'S Manual Download Page 110

1

FEATURES OF YOUR HYUNDAI

96

B500B01NF-GAT

Illuminated Glove Box

Opening the glove box will automatically
turn on the light when the multi-function
switch is turned to the first position.

NOTE:

Information about use of the trunk lid
control button located in the glove box is
located in the trunk lid section.

B541A01TG

SPECTACLE CASE

!

B491A03O-GAT

The spectacle case is located on the front
overhead console. Push the end of the
cover to open the spectacle case.

WARNING:

o Do not keep objects except spec-

tacles inside the spectacle case. Such
objects can be thrown from the case
in the event of a sudden stop or an
accident, possibly injuring the pas-
sengers in the vehicle.

o Do not open the spectacle case while

the vehicle is moving. The rear view
mirror of the vehicle can be blocked
by an open spectacle case.

B491A01TG-A

!

STORAGE BOX

B500A01TG-AAT

GLOVE BOX

WARNING:

To avoid the possibility of injury in case
of an accident or a sudden stop, the
glove box door should be kept closed
when the car is in motion.

o To open the glove box, pull on the glove

box release lever.

o The glove box door can be locked (and

unlocked) with the key.

HTG2178

Summary of Contents for 2006 Azera




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands