manualshive.com logo in svg

Hyundai 2006 Azera, Owner'S Manual

Share
Download
Hyundai 2006 Azera Owner'S Manual Download Page 123

1

FEATURES OF YOUR HYUNDAI

109

!

WARNING:

o If a person is locked in the trunk, pull

the emergency trunk release lever on
the driver's side of the inside panel of
the trunk to open the trunk lid.

o HYUNDAI recommends that cars be

kept locked and keys be kept out of
the reach of children, and that parents
teach their children about the dan-
gers of playing in trunks.

o Parents should teach children about

the emergency trunk release lever in
their vehicle and how to open the trunk
lid if they are accidentally locked in
the trunk.

B540C01TG-A

B540C01TG-AAT

To unlock using the key

To open the trunk lid, insert the key and turn
it clockwise to unlock, then pull the outside
handle toward you. The trunk compart-
ment light illuminates when the trunk lid is
opened.

B540B02E-AAT

Trunk Lid Emergency Latch Release

Your vehicle is equipped with a glow-in-
the dark emergency trunk release lever
located inside the trunk. It will glow after the
trunk is closed. When pulled, this lever will
release the trunk latch mechanism and
open the trunk.

B540B01TG-A

Summary of Contents for 2006 Azera




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands