manualshive.com logo in svg

Hyundai 2006 Azera, Owner'S Manual

Share
Download
Hyundai 2006 Azera Owner'S Manual Download Page 125

1

FEATURES OF YOUR HYUNDAI

111

!

WARNING:

o The fuel cap must be tightened until

the cap clicks, otherwise "        " light
will illuminate.

o Gasoline vapors are dangerous. Be-

fore refueling, always stop the engine
and never allow sparks or open flames
near the filler area. If you need to
replace the filler cap, use a genuine
Hyundai replacement part.

HTG2023

REMOTE FUEL-FILLER LID
RELEASE

B560A02NF-AAT

The fuel-filler lid may be opened from
inside the vehicle by pushing the fuel-filler
lid opener switch located on the driver's
door.

NOTE:

If the fuel-filler lid will not open because
ice has formed around it, tap lightly or
push on the lid to break the ice and
release the lid. Do not pry on the lid. If
necessary, spray around the lid with an
approved de-icer fluid (do not use radia-
tor anti-freeze) or move the vehicle to a
warm place and allow the ice to melt.

HTG2022

WARNING:

o If you open the fuel filler cap during

high ambient temperatures, a slight
"pressure sound" may be heard. This
is normal and not a cause for concern.
Whenever you open the fuel filler cap,
turn it slowly.

o Make sure the fuel filler cap is re-

placed and securely seated after fu-
eling. Failure to replace or fully seat
the fuel filler cap will result in fuel
vapors escaping into the atmosphere
and the check engine "           " indicator
illuminating.

o Do not "TOP-OFF" after the first nozzle

shut off when refueling.

o Automotive fuels are flammable/ex-

plosive materials. When refueling,
please note the following guidelines
carefully. Failure to follow these guide-
lines may result in severe personal
injury, severe burns or death by fire or
explosion.

!

Summary of Contents for 2006 Azera




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands