manualshive.com logo in svg

Hyundai 2006 Azera, Owner'S Manual

Share
Download
Hyundai 2006 Azera Owner'S Manual Download Page 198

2

DRIVING YOUR HYUNDAI

18

USE OF LIGHTS

C180A01A-AAT

Check your lights regularly for correct op-
eration and always keep them clean. When
driving during the day in conditions of poor
visibility, it is helpful to drive with head-
lights on low beam. This enables you to be
seen as well as to see.

C160J01A-AAT

Don't Let Ice and Snow Accumulate
Underneath

Under some conditions, snow and ice can
build up under the fenders and interfere
with the steering. When driving in severe
winter conditions where this may happen,
you should periodically check underneath
the car to be sure the movement of the front
wheels and the steering components is
not obstructed.

C160K01A-AAT

Carry Emergency Equipment

Depending on the severity of the weather
where you drive your car, you should carry
appropriate emergency equipment. Some
of the items you may want to carry include
tire chains, tow straps or chains, flashlight,
emergency flares, sand, a shovel, jumper
cables, a window scraper, gloves, ground
cloth, coveralls, a blanket, etc.

HIGHER SPEED MOTORING

C170A01A-AAT

Pre-Trip Inspections

1. Tires:
Adjust the tire inflation pressures to speci-
fication. Low tire inflation pressures will
result in overheating and possible failure
of the tires.
Avoid using worn or damaged tires which
may result in reduced traction or tire fail-
ure.

NOTE:

Never exceed the maximum tire infla-
tion pressure shown on the tires.

2. Fuel, engine coolant and engine oil:
High speed travel consumes more fuel
than urban motoring. Do not forget to check
both engine coolant and engine oil.

3. Drive belt:
A loose or damaged drive belt may result
in overheating of the engine.

Summary of Contents for 2006 Azera




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands