manualshive.com logo in svg

Hyundai 2006 Azera, Owner'S Manual

Share
Download
Hyundai 2006 Azera Owner'S Manual Download Page 220

3

WHAT TO DO IN AN EMERGENCY

13

!

D080B03TG

CAUTION:

A vehicle with an automatic transaxle
should never be towed from the rear with
the front wheels on the ground. This can
cause serious damage to the transaxle.
Be sure to use a towing dolly under the
front wheels.

3) It is recommended that your vehicle be

towed with all the wheels off the ground.

D080D04A-AAT

EMERGENCY TOWING

D080D01TG-A

For emergency towing when no commer-
cial tow vehicle is available, attach a tow
cable, chain or strap to the towing hook
under the front/rear of your car. Do not
attempt to tow your vehicle in this manner
on any unpaved surface. This could result
in serious damage to your car.
Nor should towing be attempted if the
wheels, drive train, axles, steering or
brakes are damaged. Before towing, be
sure the transaxle is in neutral and the key
is in "ACC" (with the engine off) or in the
"ON" position (with the engine running).  A
driver must be in the towed car to steer it
and operate the brakes.

NOTE:

Before towing, check the level of the
automatic transaxle fluid. If it is below
the "HOT" range on the dipstick, add
fluid. If you cannot add fluid, a towing
dolly must be used.

D080D02TG-A

Summary of Contents for 2006 Azera




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands