manualshive.com logo in svg

Hyundai 2006 Azera, Owner'S Manual

Share
Download
Hyundai 2006 Azera Owner'S Manual Download Page 132

1

FEATURES OF YOUR HYUNDAI

118

B660B01NF-AAT

To Set the Cruise Speed

1. Push the cruise control ON/OFF switch.

The "CRUISE" indicator light in the in-
strument cluster will illuminate. This
turns the system on.

2. Accelerate to desired cruising speed

above  40 km/h (25 mph).

B660B01TG

CRUISE CONTROL

B660A02S-AAT

The cruise control system provides auto-
matic speed control for your comfort when
driving on straight, open freeways, toll
roads, or other noncongested highways.
This system is designed to function above
approximately 25 mph (40 km/h).

NOTE:

Cruise control is not recommended for
city driving, winding roads, slippery
roads, heavy rain, or other bad weather
conditions.

!

B600B01TG-GAT

Electric type (If Installed)

B600B01TG

To adjust the desired position of the steer-
ing wheel, operate the adjusting switch on
the left side of the steering wheel.

WARNING:

Do not attempt to adjust the steering
wheel while driving as this may result in
loss of control of the vehicle and serious
injury or death.

Summary of Contents for 2006 Azera




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands