manualshive.com logo in svg

Hyundai 2006 Azera, Owner'S Manual

Share
Download
Hyundai 2006 Azera Owner'S Manual Download Page 217

3

10

WHAT TO DO IN AN EMERGENCY

D060I01E-AAT

8. Lower Vehicle and Tighten Nuts

Lower the car to the ground by turning
the wheel nut wrench counterclock-
wise.

Then position the wrench as shown in
the drawing and tighten the wheel nuts.
Be sure the socket is seated com-
pletely over the nut. Do not stand on the
wrench handle or use an extension pipe
over the wrench handle.
Go around the wheel tightening every
other nut until they are all tight. Then
double-check each nut for tightness.
After changing wheels, have a techni-
cian tighten the wheel nuts to their
proper torque as soon as possible.

D060I01TG-A

D060I02TG-A

D060H02O-AAT

7. Reinstall Wheel Nuts

To reinstall the wheel, hold it on the
studs, put the wheel nuts on the studs
and tighten them finger tight. The nuts
should be installed with their small di-
ameter ends directed inward. Jiggle the
tire to be sure it is completely seated,
then tighten the nuts as much as pos-
sible with your fingers again.

D060H01TG-A

Summary of Contents for 2006 Azera




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands