manualshive.com logo in svg

Hyundai 2006 Azera, Owner'S Manual

Share
Download
Hyundai 2006 Azera Owner'S Manual Download Page 133

1

FEATURES OF YOUR HYUNDAI

119

NOTE:

If the vehicle speed decreases more
than 9 mph (15 km/h) below the set speed
or decreases below 25 mph (40 km/h),
the cruise control system will automati-
cally cancel the set speed.

B660B02TG

3. Push the "SET" (COAST) switch after

you have set the vehicle speed at the
desired speed.
If the "SET (COAST)" switch is selected,
the cruise "SET" indicator light in the
instrument cluster will illuminate.

4. Remove your foot from the accelerator

pedal and the desired speed will auto-
matically be maintained.

5. To increase speed, temporarily depress

the accelerator pedal enough for the
vehicle to exceed the preset speed.
When you remove your foot from the
accelerator pedal, the vehicle will re-
turn to the speed you have set.

B660C01TG-AAT

To Cancel the Cruise Speed

To disengage the cruise control system,
push the control switch "CANCEL".
Additionally, the following actions will dis-
engage the system:

o Depress the brake pedal.
o Shift the selector lever to "N" position.
o Decrease the vehicle speed lower than

the memory speed by 9 mph (15 km/h).

o Decrease the vehicle speed to less

than  25 mph (40 km/h).

o Release the cruise control ON/OFF

switch.

B660C01TG

Summary of Contents for 2006 Azera




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands