manualshive.com logo in svg

Hyundai 2006 Azera, Owner'S Manual

Share
Download
Hyundai 2006 Azera Owner'S Manual Download Page 121

1

FEATURES OF YOUR HYUNDAI

107

PARKING BRAKE

B530A01TG-AAT

Always engage the parking brake before
leaving the vehicle. This also turns on the
parking brake indicator light when the key
is in the "ON" or "START" position. Before
driving away, be sure that the parking
brake is fully released and the indicator
light is off.

o To engage the parking brake, depress

the parking brake pedal.

o To release the parking brake, depress

the parking brake pedal a second time.

NOTE:

The parking brake pedal should be
checked periodically for proper stroke.

B530A01TG-A

TRUNK LID

B540A01S-GAT

Remote Trunk Lid Release

To open the trunk lid without using the key,
pull up the lid release lever.

HTG2014

!

This device complies with Part 15 FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference, and (2) this
device must accept any interference re-
ceived, including interference that may
cause undesired operation.

WARNING:

The transceiver has been tested and
complies with FCC and Industry Canada
rules. Changes or modifications not ex-
pressly approved by the party respon-
sible for compliance could void the user's
authority to operate the device.

NVS

®

 is a registered trademark and Z-

Nav™ is a trademark of the Gentex Corpo-
ration, Zeeland, Michigan.  HomeLink

®

 is

a registered trademark owned by Johnson
Controls, Incorporated, Milwaukee, Wis-
consin.

Summary of Contents for 2006 Azera




















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands