manualshive.com logo in svg

Hyundai 2005 Accent, Owner'S Manual

The Hyundai 2005 Accent Owner's Manual is an essential guide for all owners of this reliable and efficient vehicle. Download it for free from manualshive.com and have instant access to detailed instructions, diagrams, and maintenance tips, allowing you to maximize your driving experience with your Hyundai Accent.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

85

3. BASS Control Knob

Press to pop the knob out and turn to the left or
right for the desired bass tone.

TREB (Treble Control) Knob

Pull the bass control knob further out. Turn to
the left or right for the desired treble tone.

4. SCAN Button

When the scan button is pressed, the frequency
will increase and the receivable stations will be
tuned in one after another, receiving each sta-
tion for 5 seconds. To stop scanning, press the
scan button again.

5. TUNE (Manual) Select Button

Press the (   ) side or (   ) side to increase or to
decrease the frequency. Press either button and
hold down to continuously scroll. Release but-
ton once the desired station is reached.

SEEK Operation
(Automatic Channel Selection)

Press the TUNE select button for 0.5 sec or
more. Releasing it will automatically tune to the
next available station with a beep sound.
When the (  ) side is pressed longer than 0.5
second, releasing will automatically tune to the
next higher frequency and when the (   ) side is
pressed longer than 0.5 second, releasing will
automatically tune to the next lower frequency.

6. BAND Selector

Pressing the           button changes the AM, FM1
and FM2 bands. The mode selected is dis-
played on LCD.

7. PRESET STATION SELECT Button

Six (6) stations for AM, FM1 and FM2 respec-
tively can be preset in the electronic memory
circuit on this unit.

H260B05O-AAT

1. POWER ON-OFF Control Knob

The radio unit may be operated when the igni-
tion key is in the "ACC" or "ON" position.  Press
the knob to switch the power on. The LCD
shows the radio frequency in the radio mode or
the CD track indicator in the CD mode. To
switch the power off, press the knob again.

VOLUME Control

Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise to
reduce the volume.

BALANCE Control

Pull and turn the control knob clockwise to
emphasize right speaker sound (left speaker
sound will be attenuated). When the control
knob is turned counterclockwise, left speaker
sound will be emphasized (right speaker sound
will be attenuated).

2. FAD (Fader Control) Knob

Turn the control knob counterclockwise to em-
phasize front speaker sound (rear speaker
sound will be attenuated). When the control
knob is turned clockwise, rear speaker sound
will be emphasized (front speaker sound will
be attenuated).

FM/AM

Summary of Contents for 2005 Accent




























































































































































































































Reviews:

No comments

Related manuals for 2005 Accent

Valeo SC400 Operating Instructions Manual preview
SC400
Brand: Valeo Pages: 17
Jabra FREEWAY Datasheet preview
FREEWAY
Brand: Jabra Pages: 2
Jabra BT330 User Manual preview
BT330
Brand: Jabra Pages: 38
OEM Tools 22505 Operating Instructions And Parts Manual preview
22505
Brand: OEM Tools Pages: 4
Cequent 10417 Instruction Sheets preview
10417
Brand: Cequent Pages: 9
Whispbar K925W Fitting Instructions Manual preview
K925W
Brand: Whispbar Pages: 15
FORM FIT 1303 Installation Instructions preview
1303
Brand: FORM FIT Pages: 2
Volvo 2004 V70 (Swedish) Användarmanual preview
2004 V70
Brand: Volvo Pages: 188
GMC Envoy XUV 2004 Getting To Know Manual preview
Envoy XUV 2004
Brand: GMC Pages: 20
Nav TV AUDI A6 Installation Manual preview
AUDI A6
Brand: Nav TV Pages: 5
Dodge Ram Commercial2016 Owner'S Manual preview
Ram Commercial2016
Brand: Dodge Pages: 675
Hama 00 123530 Operating Instructions preview
00 123530
Brand: Hama Pages: 4
Volvo 1992 850 Service And Repair Manual preview
1992 850
Brand: Volvo Pages: 230
FVC Sprinter Side Ladder Installation Manual preview
Sprinter Side Ladder
Brand: FVC Pages: 8
Rugged Ridge 53701.52 Installation Manual preview
53701.52
Brand: Rugged Ridge Pages: 5
Coolster CHALLENGER GK-6125A 2018 Manual preview
CHALLENGER GK-6125A 2018
Brand: Coolster Pages: 45
Suzuki SX4 2016 Owner'S Manual preview
SX4 2016
Brand: Suzuki Pages: 504
Axxess AXGMLN-09 Installation Instructions preview
AXGMLN-09
Brand: Axxess Pages: 4

Brands by name

Popular brands

Load more brands