manualshive.com logo in svg

Hyundai 2005 Accent, Owner'S Manual

The Hyundai 2005 Accent Owner's Manual is an essential guide for all owners of this reliable and efficient vehicle. Download it for free from manualshive.com and have instant access to detailed instructions, diagrams, and maintenance tips, allowing you to maximize your driving experience with your Hyundai Accent.

Share
Download
background image

6

DO-IT-YOURSELF MAINTENANCE

17

HLC2097

2. Remove the cable and the wiring from the

filter cover.

HLC2098

3. Remove the filter cover by pushing the upper

end of the filter cover.

HLC2099

4. Replace the two filters.
5. Installation is the reverse order of disassem-

bly.

CAUTION:

Be sure to install the air conditioner filter in
the direction of the arrow sign. Otherwise, it
may cause noise or deterioration.

!

CHECKING THE FREE-PLAY

G150A01A-AAT

Steering Wheel

To check the steering wheel free-play, stop the
car with the wheels pointed straight ahead and
gently move the steering wheel back and forth.
Use very light finger pressure and be sensitive
to changes in resistance that mark the limits of
the free-play. If the free-play is greater than
specified, have it inspected by your Hyundai
dealer and adjusted or repaired if necessary.

HLC5008

1.18 in.
(30 mm)

Summary of Contents for 2005 Accent




























































































































































































































Reviews:

No comments

Related manuals for 2005 Accent

Abarth 595 Owner'S Handbook Manual preview
595
Brand: Abarth Pages: 176
Pacbrake 10475 Installation Manual preview
10475
Brand: Pacbrake Pages: 9
Jeep UNIVERSAL CJ-2A Operation Data preview
UNIVERSAL CJ-2A
Brand: Jeep Pages: 27
Jeep RENEGADE 2016 User Manual preview
RENEGADE 2016
Brand: Jeep Pages: 228
Jeep PATRIOT 2013 User Manual preview
PATRIOT 2013
Brand: Jeep Pages: 108
Jeep PATRIOT 2013 Owner'S Manual preview
PATRIOT 2013
Brand: Jeep Pages: 525
Lancia THESIS CONNECT Owner'S Handbook Manual preview
THESIS CONNECT
Brand: Lancia Pages: 386
Vauxhall Meriva Quick Reference Manual preview
Meriva
Brand: Vauxhall Pages: 2
Vauxhall Ampera Quick Reference Manual preview
Ampera
Brand: Vauxhall Pages: 2
Vauxhall 2012 Agila Quick Reference Manual preview
2012 Agila
Brand: Vauxhall Pages: 2
Vauxhall 2013 Mokka Owner'S Manual preview
2013 Mokka
Brand: Vauxhall Pages: 209
VBC Racing WildFire Instruction Manual preview
WildFire
Brand: VBC Racing Pages: 34
Vauxhall 2013 Corsa Infotainment system Quick Reference Manual preview
2013 Corsa Infotainment system
Brand: Vauxhall Pages: 2
Vauxhall 2010 Astra Quick Reference Manual preview
2010 Astra
Brand: Vauxhall Pages: 2
Vauxhall Antara Owner'S Manual preview
Antara
Brand: Vauxhall Pages: 236
Cadillac 2007 CTS Owner'S Manual preview
2007 CTS
Brand: Cadillac Pages: 518
Opel OPEL INSIGNIA Infotainment Manual preview
OPEL INSIGNIA
Brand: Opel Pages: 141
Gator GX5HDKT User Manual preview
GX5HDKT
Brand: Gator Pages: 8

Brands by name

Popular brands

Load more brands