manualshive.com logo in svg

Hyundai 2005 Accent, Owner'S Manual

The Hyundai 2005 Accent Owner's Manual is an essential guide for all owners of this reliable and efficient vehicle. Download it for free from manualshive.com and have instant access to detailed instructions, diagrams, and maintenance tips, allowing you to maximize your driving experience with your Hyundai Accent.

Share
Download
background image

6

DO-IT-YOURSELF MAINTENANCE

25

REPLACEMENT OF LIGHT BULBS

!

G260A02A-AAT

Before attempting to replace a light bulb, be sure
the switch is turned to the "OFF" position.
The next paragraph shows how to reach the
light bulbs so they may be changed. Be sure to
replace the burned-out bulb with one of the
same number and wattage rating.
See page 6-31 for the wattage descriptions

CAUTION:

Keep the lamps out of contact with petro-
leum products, such as oil, gasoline, etc.

HLC5033

G270A03A-AAT

Headlight Bulb

1. Allow the bulb to cool. Wear eye protection.
2. Open the engine hood.
3. Always grasp the bulb by its plastic base,

avoid touching the glass.

4. Using a socket wrench of the correct size,

remove the headlight assembly mounting
bolts.

6. Remove the dust cover.

HLC5009

5. Disconnect the power cord from the bulb

base in the back of the headlight.

HLC5034-1

Summary of Contents for 2005 Accent




























































































































































































































Reviews:

No comments

Related manuals for 2005 Accent

Daihatsu TERIOS J100 Maintenance Manual preview
TERIOS J100
Brand: Daihatsu Pages: 43
Jeep Compass Owner'S Handbook Manual preview
Compass
Brand: Jeep Pages: 322
Jeep Compass Repair Manual preview
Compass
Brand: Jeep Pages: 341
Jeep Compass Operating Information Manual preview
Compass
Brand: Jeep Pages: 310
Jeep Compass Information Manual preview
Compass
Brand: Jeep Pages: 189
Jeep Compass Review preview
Compass
Brand: Jeep Pages: 26
Jeep Compass Overview preview
Compass
Brand: Jeep Pages: 21
kaarta STENCIL PRO Assembly & Use preview
STENCIL PRO
Brand: kaarta Pages: 29
GReddy Intercooler Kit Type 31 Installation Manual preview
Intercooler Kit Type 31
Brand: GReddy Pages: 9
JANE StrataPlatform Instructions Manual preview
StrataPlatform
Brand: JANE Pages: 58
GARO Wallbox GLB Quick Start Manual preview
Wallbox GLB
Brand: GARO Pages: 15
Ford Mustang 2007 Supplement Manual preview
Mustang 2007
Brand: Ford Pages: 40
Safe Fleet Prime Design OCM-3032 Quick Start Manual preview
Prime Design OCM-3032
Brand: Safe Fleet Pages: 4
Calix M5T 204 Assembly Instructions preview
M5T 204
Brand: Calix Pages: 4
Meritor 93000 Service Service Manual preview
93000 Service
Brand: Meritor Pages: 20
Stealthbox SB-J-GCHER2/10W3v2 Installation Manual preview
SB-J-GCHER2/10W3v2
Brand: Stealthbox Pages: 2
Chevrolet Chevy II 1965 Owner'S Manual preview
Chevy II 1965
Brand: Chevrolet Pages: 46
Kargo Master 80070 Instruction Manual preview
80070
Brand: Kargo Master Pages: 17

Brands by name

Popular brands

Load more brands