manualshive.com logo in svg

Hyundai 2005 Accent, Owner'S Manual

The Hyundai 2005 Accent Owner's Manual is an essential guide for all owners of this reliable and efficient vehicle. Download it for free from manualshive.com and have instant access to detailed instructions, diagrams, and maintenance tips, allowing you to maximize your driving experience with your Hyundai Accent.

Share
Download
background image

3

WHAT TO DO IN AN EMERGENCY

5

SPARE TIRE

Spare Tire Pressure

D040A01A-AAT

The following instructions for the tem-
porary spare tire should be observed:

1. Check inflation pressure as soon

as is practical after installing the
spare tire, and adjust to the speci-
fied pressure. The tire pressure
should be periodically checked and
maintained at the specified pres-
sure while the tire is stored.

!

Tire Size

Inflation Pressure

T105/70D(R)14

60 psi (420 kPa)

CAUTION:

Serious loss of coolant indicates there is a
leak in the cooling system and this should
be checked as soon as possible by a Hyundai
dealer.

3. Continuous use at speeds of over

50 mph (80 km/h) is not recom-
mended.

4. As the temporary spare tire is spe-

cifically designed for your car, it
should not be used on any other
vehicle.

5. The temporary spare tire should

not be used on any other wheels,
nor should standard tires, snow
tires, wheel covers or trim rings be
used with the temporary spare
wheel. If such use is attempted,
damage to these items or other car
components may occur.

6. The temporary spare tire pressure

should be checked once a month
while the tire is stored.

2. The spare tire should only be used

temporarily and should be returned
to the luggage compartment as
soon as the original tire can be
repaired or replaced.

Summary of Contents for 2005 Accent




























































































































































































































Reviews:

No comments

Related manuals for 2005 Accent

Kolpin 25-9250 Owner'S And Operator'S Manual preview
25-9250
Brand: Kolpin Pages: 25
Gator HUDGPS1 Quick Start Manual preview
HUDGPS1
Brand: Gator Pages: 2
Honda Sedan CIVIC 2022 Manual preview
Sedan CIVIC 2022
Brand: Honda Pages: 701
FVC Sprinter Side Ladder Installation Manual preview
Sprinter Side Ladder
Brand: FVC Pages: 8
Whelen Engineering Company LED Dominator TAM83S2 Installation Manual preview
LED Dominator TAM83S2
Brand: Whelen Engineering Company Pages: 2
Edelbrock 29135 Installation Instructions preview
29135
Brand: Edelbrock Pages: 2
Mercedes-Benz 1989 560 SL Owner'S Manual preview
1989 560 SL
Brand: Mercedes-Benz Pages: 93
OMNISTOR Omni-Bike Sport Ducato Installation preview
Omni-Bike Sport Ducato
Brand: OMNISTOR Pages: 5
AllTrade Powerbuilt 648601 Operating Instructions preview
Powerbuilt 648601
Brand: AllTrade Pages: 3
Perrycraft SportQuest Series Installation preview
SportQuest Series
Brand: Perrycraft Pages: 2
Pyle PLPSC8 User Manual preview
PLPSC8
Brand: Pyle Pages: 14
QA1 MU1RCA Install Instructions preview
MU1RCA
Brand: QA1 Pages: 4
Westin Sportsman 40-0125 Installation Instructions preview
Sportsman 40-0125
Brand: Westin Pages: 2
GMC Chevrolet CAMARO 1969 Owner'S Manual preview
Chevrolet CAMARO 1969
Brand: GMC Pages: 92
Kuda-Phonebase 291790 Installation Instruction preview
291790
Brand: Kuda-Phonebase Pages: 3
Discount Car Stereo A2DIY-CHRY Installation Manual preview
A2DIY-CHRY
Brand: Discount Car Stereo Pages: 5
Toyota RAV4 2019 Owner'S Manual preview
RAV4 2019
Brand: Toyota Pages: 244
Honda 2013 Crosstour Owner'S Manual preview
2013 Crosstour
Brand: Honda Pages: 571

Brands by name

Popular brands

Load more brands