manualshive.com logo in svg

Hyundai 2005 Accent, Owner'S Manual

The Hyundai 2005 Accent Owner's Manual is an essential guide for all owners of this reliable and efficient vehicle. Download it for free from manualshive.com and have instant access to detailed instructions, diagrams, and maintenance tips, allowing you to maximize your driving experience with your Hyundai Accent.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

80

3. TREB (Treble Control) Knob

Press to pop the knob out and turn to the left or
right for the desired treble tone.

FAD (Fader Control) Knob

Pull the treble control knob further out.
Turn the control knob counterclockwise to em-
phasize front speaker sound (rear speaker
sound will be attenuated).
When the control knob is turned clockwise,
rear speaker sound will be emphasized (front
speaker sound will be attenuated).

4. TUNE (Manual) Select Button

Press the (   ) side or (   ) side to increase or to
decrease the frequency. Press either button and
hold down to continuously scroll. Release but-
ton once the desired station is reached.

SEEK Operation
(Automatic Channel Selection)

Press the TUNE select button 0.5 sec or more.
Releasing it will automatically tune to the next
available station with a beep sound.

When the (   ) side is pressed longer than 0.5
second, releasing will automatically tune to the
next higher frequency and when the (    ) side
is pressed longer than 0.5 second, releasing
will automatically tune to the next lower fre-
quency.

5. BAND Selector

Pressing the            button changes the AM, FM1
and FM2 bands. The mode selected is dis-
played on LCD.

6. PRESET STATION SELECT Button

Six (6) stations for AM, FM1 and FM2 respec-
tively can be preset in the electronic memory
circuit on this unit.

HOW TO PRESET STATIONS

Six AM and twelve FM stations may be pro-
grammed into the memory of the radio. Then, by
simply pressing the band select button and/or
one of the six station select buttons, you may
recall any of these stations instantly. To pro-
gram the stations, follow these steps:

H240B04O-AAT

1. POWER ON-OFF Control Knob

The radio unit may be operated when the igni-
tion key is in the "ACC" or "ON" position.  Press
the knob to switch the power on. The LCD
shows the radio frequency in the radio mode or
the tape direction indicator in the tape mode. To
switch the power off, press the knob again.

VOLUME Control

Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise to
reduce the volume.

2. BASS Control Knob

Press the control knob to pop knob out and
turn to the left or right for the desired bass
tone.

BAL (Balance Control) Knob

Pull the bass control knob further out.Turn the
control knob clockwise to emphasize right
speaker sound (left speaker sound will be
attenuated).
When the control knob is turned counterclock-
wise, left speaker sound will be emphasized
(right speaker sound will be attenuated).

FM/AM

Summary of Contents for 2005 Accent




























































































































































































































Reviews:

No comments

Related manuals for 2005 Accent

Ultra Start KE-6 Owner'S Manual preview
KE-6
Brand: Ultra Start Pages: 8
Kuda-Phonebase 055040 Installation Instruction preview
055040
Brand: Kuda-Phonebase Pages: 3
Wilco Offroad UHG2060/AU Installation Manual preview
UHG2060/AU
Brand: Wilco Offroad Pages: 4
AA Products SR-A260 Instruction Manual preview
SR-A260
Brand: AA Products Pages: 4
Mercedes-Benz AMG E-Class Supplement Manual preview
AMG E-Class
Brand: Mercedes-Benz Pages: 54
Meta System 900000358 Installation Technical Sheet preview
900000358
Brand: Meta System Pages: 22
GReddy 12519101 Instruction Manual preview
12519101
Brand: GReddy Pages: 12
Volvo 30661683 Installation Instructions, Accessories preview
30661683
Brand: Volvo Pages: 18
EUFAB 12014 Manual preview
12014
Brand: EUFAB Pages: 20
RAM Cargo Van 2014 Owner'S Manual preview
Cargo Van 2014
Brand: RAM Pages: 666
Waeco PerfectView LCD350 Installation And Operating Manual preview
PerfectView LCD350
Brand: Waeco Pages: 36
Metra Electronics 99-9302 Installation Instructions Manual preview
99-9302
Brand: Metra Electronics Pages: 8
MMD 41240 Quick Manual preview
41240
Brand: MMD Pages: 3
Charge Amps Halo Pole Mount Manual preview
Halo Pole Mount
Brand: Charge Amps Pages: 14
Gentex Full Display Mirror Installation Instructions Manual preview
Full Display Mirror
Brand: Gentex Pages: 18
Alfa Romeo Stelvio 2019 User Manual preview
Stelvio 2019
Brand: Alfa Romeo Pages: 268
FAAFTECH FT-RC-RN Installation Manual preview
FT-RC-RN
Brand: FAAFTECH Pages: 2
Wabtec R-290 Service Manual preview
R-290
Brand: Wabtec Pages: 216

Brands by name

Popular brands

Load more brands