manualshive.com logo in svg

Hyundai 2005 Accent, Owner'S Manual

The Hyundai 2005 Accent Owner's Manual is an essential guide for all owners of this reliable and efficient vehicle. Download it for free from manualshive.com and have instant access to detailed instructions, diagrams, and maintenance tips, allowing you to maximize your driving experience with your Hyundai Accent.

Share
Download
background image

DRIVING YOUR HYUNDAI

17

2

Vehicle capacity weight:

880 lbs (400 kg)
Vehicle capacity weight is the maxi-
mum combined weight of occupants
and cargo. If your vehicle is equipped
with a trailer, the combined weight
includes the tongue load.

Seating capacity:

Total: 5 persons

(Front seat: 2 persons,
Rear seat: 3 persons)

Seating capacity is the maximum num-
ber of occupants including a driver,
your vehicle may carry.
However the seating capacity may be
reduced based upon the weight of all
of the occupants, and the weight of the
cargo being carried or towed. Do not
overload the vehicle as there is a limit
to the total weight, or load limit includ-
ing occupants and cargo, the vehicle
can carry.

Towing capacity:

Towing capacity is the maximum trailer
weight including its cargo weight, your
vehicle can tow. See the section
"Trailer or Vehicle Towing" for specifi-
cations about the trailer weight.

Cargo capacity:

The cargo capacity of your vehicle will
increase or decrease depending on the
weight and the number of occupants
and the tongue load, if your vehicle is
equipped with a trailer.

Steps for Determining Correct Load
Limit

(1)Locate the statement "The com-

bined weight of occupants and cargo
should never exceed XXX pounds''
on your vehicle's placard.

(2)Determine the combined weight of

the driver and passengers that will
be riding in your vehicle.

(3)Subtract the combined weight of the

driver and passengers from XXX
kilograms or XXX pounds.

(4)The resulting figure equals the avail-

able amount of cargo and luggage
load capacity. For example, if the
"XXX" amount equals 1400 lbs, and
there will be five 150 lb. passengers
in your vehicle, the amount of avail-
able cargo and luggage load capac-
ity is 650 lbs. (1400-750 (5 x 150) =
650  lbs.)

(5)Determine the combined weight of

luggage and cargo being loaded on
the vehicle. That weight may not
safely exceed the available cargo
and luggage load capacity calcu-
lated in Step 4.

(6)If your vehicle will be towing a trailer,

load from your trailer will be trans-
ferred to your vehicle. Consult this
manual to determine how this re-
duces the available cargo and lug-
gage load capacity of your vehicle.

Summary of Contents for 2005 Accent




























































































































































































































Reviews:

No comments

Related manuals for 2005 Accent

Kargo Master 40020 Assembly Manual preview
40020
Brand: Kargo Master Pages: 6
Daihatsu G200 Service Manual preview
G200
Brand: Daihatsu Pages: 485
CAMPARK R10 Manual preview
R10
Brand: CAMPARK Pages: 20
Harbor Freight Tools 92043 Assembly And Operating Instructions preview
92043
Brand: Harbor Freight Tools Pages: 4
RACLET SAFARI Setup And Maintenance Manual preview
SAFARI
Brand: RACLET Pages: 48
RACLET Allegra Manual preview
Allegra
Brand: RACLET Pages: 31
OEM Audio Reference Series Manual preview
Reference Series
Brand: OEM Audio Pages: 29
Saleen 10-8002-C11670C Manual preview
10-8002-C11670C
Brand: Saleen Pages: 17
Atera 022 681 Manual preview
022 681
Brand: Atera Pages: 10
RAM 4500 CHASSIS CAB 2012 Specification preview
4500 CHASSIS CAB 2012
Brand: RAM Pages: 7
VDO DLD Wide Range II Installation Instructions Manual preview
DLD Wide Range II
Brand: VDO Pages: 84
Wagan TravelCharge Companion GO-Plus User Manual preview
TravelCharge Companion GO-Plus
Brand: Wagan Pages: 3
Cadillac 2009 CTS Personalization Manual preview
2009 CTS
Brand: Cadillac Pages: 20
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
Wagan Easy Air Auto Screen User Manual preview
Easy Air Auto Screen
Brand: Wagan Pages: 8
Edelbrock 5756 Installation Instructions preview
5756
Brand: Edelbrock Pages: 1
Volvo XC60 2014 Wiring Diagrams preview
XC60 2014
Brand: Volvo Pages: 362

Brands by name

Popular brands

Load more brands