manualshive.com logo in svg

Hyundai 2005 Accent, Owner'S Manual

The Hyundai 2005 Accent Owner's Manual is an essential guide for all owners of this reliable and efficient vehicle. Download it for free from manualshive.com and have instant access to detailed instructions, diagrams, and maintenance tips, allowing you to maximize your driving experience with your Hyundai Accent.

Share
Download
background image

6

DO-IT-YOURSELF MAINTENANCE

22

POWER STEERING FLUID LEVEL

CHECKING ELECTRIC COOLING
FANS

!

G220A01A-AAT

G230A03A-AAT

G220B01A-AAT

Checking Engine Cooling Fan

The engine cooling fan should come on auto-
matically if the engine coolant temperature is
high.

WARNING:

The radiator fan is controlled by engine cool-
ant temperature and may sometimes operate
even when the engine is not running. Use
extreme caution when working near the
blades of the cooling fan, so that you are not
injured by a rotating fan blade. As the cool-
ant temperature decreases the fan will auto-
matically shut off. This is a normal condition.

G220C01A-AAT

Checking Condenser Cooling Fan

The condenser cooling fan should come on
automatically whenever the air conditioner is in
operation.

HLC5006

The power steering fluid level should be checked
regularly. To check the power steering fluid
level, be sure the engine is "OFF", then check to
make certain that the power steering fluid level
is between the "MAX" and "MIN" level markings
on the fluid reservoir.

NOTE:

Grinding noise from the power steering pump
may be heard immediately after the engine is
started in extremely cold conditions (below
-4°F). If the noise stops during warm up,
there is no abnormal function in the system.
It is due to a power steering fluid character-
istic in extremely cold conditions.

If any electrolyte gets into your
eyes, flush your eyes with clean
water for at least 15 minutes and
get immediate medical attention.
If possible, continue to apply wa-
ter with a sponge or cloth until
medical attention is received.
If electrolyte gets on your skin,
thoroughly wash the contacted
area.
If you feel a pain or a burning
sensation, get medical attention
immediately.
Wear eye protection when charg-
ing or working near a battery.
Always provide ventilation when
working in an enclosed space.

o When lifting a plastic-cased battery, ex-

cessive pressure on the case may cause
battery acid to leak, resulting in personal
injury. Lift with a battery carrier or with
your hands on opposite corners.

o Never attempt to charge the battery when

the battery cables are connected.

o The electrical ignition system works with

high voltage.
Never touch these components with the
engine running or the ignition switched
on.

Summary of Contents for 2005 Accent




























































































































































































































Reviews:

No comments

Related manuals for 2005 Accent

ZAPTEC Go Instruction Manual preview
Go
Brand: ZAPTEC Pages: 240
DAVIS 8126GD User Manual preview
8126GD
Brand: DAVIS Pages: 32
Thule 1306 RAPID SYSTEM Fitting Instructions Manual preview
1306 RAPID SYSTEM
Brand: Thule Pages: 8
Buick 2005 Terraza Owner'S Manual preview
2005 Terraza
Brand: Buick Pages: 428
Subaru 2007 Impreza Brochure & Specs preview
2007 Impreza
Brand: Subaru Pages: 21
Alfa Romeo Alfa 147 Quick Start Manual preview
Alfa 147
Brand: Alfa Romeo Pages: 8
GAC MOTOR EMPOW Manual preview
EMPOW
Brand: GAC MOTOR Pages: 356
Motoalliance Denali MA11705 Manual preview
Denali MA11705
Brand: Motoalliance Pages: 5
Lexus HS 250h Vehicle Dismantling Manual preview
HS 250h
Brand: Lexus Pages: 34
Toyota 86 2020 Quick Reference Manual preview
86 2020
Brand: Toyota Pages: 32
Audi Audi 80 1987 Workshop Manual preview
Audi 80 1987
Brand: Audi Pages: 63
Cadillac 2004 Seville Customer Convenience/Personalization Manual preview
2004 Seville
Brand: Cadillac Pages: 20
Pyle PLRD146 User Manual preview
PLRD146
Brand: Pyle Pages: 8
Dodge Charger SRT 392 2017 Operating Information Manual preview
Charger SRT 392 2017
Brand: Dodge Pages: 576
Lexus LS 500h 2022 Owner'S Manual, Quick Manual preview
LS 500h 2022
Brand: Lexus Pages: 108
AUTOTECH 10.109.418K Installation Instructions preview
10.109.418K
Brand: AUTOTECH Pages: 4
Uniden BTSC1100 Owner'S Manual preview
BTSC1100
Brand: Uniden Pages: 16
Black Horse Off Road TR-JECOOE Installation Instructions preview
TR-JECOOE
Brand: Black Horse Off Road Pages: 3

Brands by name

Popular brands

Load more brands