manualshive.com logo in svg

Hyundai 2005 Accent, Owner'S Manual

The Hyundai 2005 Accent Owner's Manual is an essential guide for all owners of this reliable and efficient vehicle. Download it for free from manualshive.com and have instant access to detailed instructions, diagrams, and maintenance tips, allowing you to maximize your driving experience with your Hyundai Accent.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

42

INSTRUMENT CLUSTER

B270A01A-AAT

BRAKE PAD WEAR WARNING
SOUND

The front disc brake pads have wear indicators
that should make a high-pitched squealing or
scraping noise when new pads are needed. The
sound may come and go or be heard all the time
when the vehicle is moving. It may also be
heard when the brake pedal is pushed down
firmly. Expensive rotor damage will result if the
worn  pads are not replaced. See your Hyundai
dealer immediately.

B900A01A-AAT

LIGHTS ON WARNING SOUND

The warning chime sounds when the tail lights
are on and the driver side door is open. This
prevents the battery from discharging by
warning you when the car is left with the tail
lights on. The chime sounds until the tail lights
are turned off.

B280A01A-AAT

FUEL GAUGE

The needle on the gauge indicates the ap-
proximate fuel level in the fuel tank. The fuel
capacity is given in Section 9.

HLC2052

!

B290A02A-AAT

ENGINE COOLANT TEMPERATURE
GAUGE

WARNING:

Never remove the radiator cap when the en-
gine is hot. The engine coolant is under pres-
sure and could erupt and cause severe burns.
Wait until the engine is cool before removing
the radiator cap.

HLC2053

Summary of Contents for 2005 Accent




























































































































































































































Reviews:

No comments

Related manuals for 2005 Accent

PAC I GM3 Instruction Manual preview
I GM3
Brand: PAC Pages: 15
Zavoli Bora Technical Instructions And Installation Manual preview
Bora
Brand: Zavoli Pages: 26
GATmatic TWC-562S Installation, Operation & Maintenance Manual preview
TWC-562S
Brand: GATmatic Pages: 13
GMC 2005 Sierra Denali Owner'S Manual preview
2005 Sierra Denali
Brand: GMC Pages: 428
Mercedes-Benz GLA 250 2019 Operator'S Manual preview
GLA 250 2019
Brand: Mercedes-Benz Pages: 346
Thule Kit 1514 Instructions preview
Kit 1514
Brand: Thule Pages: 4
Cargo Floor CF500 SL-2 Replacement Instructions Manual preview
CF500 SL-2
Brand: Cargo Floor Pages: 16
Mercedes-Benz R-Class Owner'S Manual preview
R-Class
Brand: Mercedes-Benz Pages: 373
Saleen 10-8002-C11670C Manual preview
10-8002-C11670C
Brand: Saleen Pages: 17
Flash Cover MN002 Installation Manual preview
MN002
Brand: Flash Cover Pages: 2
JANE StrataPlatform Instructions Manual preview
StrataPlatform
Brand: JANE Pages: 58
Hank HKWP1100-10Q User Quick Manual preview
HKWP1100-10Q
Brand: Hank Pages: 2
Ratio Power box Manual preview
Power box
Brand: Ratio Pages: 12
Horn Tools PHRRF002 Mounting Instructions preview
PHRRF002
Brand: Horn Tools Pages: 8
Z Flash OBD-II STALK User Manual preview
OBD-II STALK
Brand: Z Flash Pages: 4
Thule 1597 Instructions preview
1597
Brand: Thule Pages: 4
Car-Interface CI-RL4-R40 Manual preview
CI-RL4-R40
Brand: Car-Interface Pages: 25
Directed Directechs FORD11 Installation Manual preview
Directechs FORD11
Brand: Directed Pages: 23

Brands by name

Popular brands

Load more brands