Installation Instructions
AIR/FUEL (Narrow Band)
Page 1/3
Wiring Guide:
Wire colour
Wire Function
Wire Connection Location
White
Vehicle body
Battery 12V+
Ground 12V-
Black
Orange
Illumination 12V+ (
NOT
adjustable
) Park light circuit (do
NOT
connect to a dimmer)
Typical Layout
Wiring Diagram
Ignition harness / Fuse box
Red
Ignition 12V+
Green
Sensor input
Ignition harness / Fuse box
Colour change button
Battery 12V+
Ground 12V-
Ignition 12V+
Illumination 12V+
Mounting studs for U bracket.
Fitting U bracket
: Remove nuts
and replace with stud spacers
that are supplied in this kit.
Connector pinout
Batch #
Sensor input
Rear of gauge
Important notes before installing:
-
Installing this product to your vehicle may require an adaptor. SAAS make a large range of
adaptors and installation parts, please check with your SAAS dealer for available adaptors.
-
SAAS Muscle series gauges are designed for
12volt
systems
ONLY!
-
All installation work should be done by a qualified professional to avoid damage to this product.
-
SAAS
RECOMMENDS
all products be tested prior to installation. This will save time and speed up
the troubleshooting process if you encounter any issues.
SAAS Automotive PTY LTD
25 Metrolink Circuit West Campbellfield
Victoria 3061 Australia
ABN: 48166279670 ACN: 166279670
Phone: +61 3 9930 0100
Fax: +61 3 8339 2270
Email: [email protected]
SINCE 1954
Oxygen sensor / PCM Module
