manualshive.com logo in svg

Hyundai 2005 Accent, Owner'S Manual

The Hyundai 2005 Accent Owner's Manual is an essential guide for all owners of this reliable and efficient vehicle. Download it for free from manualshive.com and have instant access to detailed instructions, diagrams, and maintenance tips, allowing you to maximize your driving experience with your Hyundai Accent.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

2

FUEL RECOMMENDATIONS

UNLEADED
FUEL ONLY

B010A04A

!

B010A02A-AAT

Use Unleaded Gasoline

Unleaded gasoline with a Pump Octane
Rating of 87 (Research Octane Number 91)
or higher must be used in your Hyundai.

If leaded gasoline is used, it will cause the
catalytic converter to become ineffective and
the emission control system to malfunction. This
can also result in increased maintenance ex-
pense.

To avoid accidental use of leaded fuel, the larger
nozzle used with leaded gasoline at service
stations cannot be inserted into the fuel tank
opening of your Hyundai.

B010B01A-AAT

What About Gasohol?

Gasohol (a mixture of 90% unleaded gasoline
and 10% ethanol or grain alcohol) may be used
in your Hyundai. However, if your engine devel-
ops driveability problems, the use of 100% un-
leaded gasoline is recommended. Fuels with
unspecified quantities of alcohol, or alcohols
other than ethanol, should not be used.

B010C01A-AAT

Use of MTBE

Hyundai recommends that fuels containing
MTBE (Methyl Tertiary Butyl Ether) over 15.0%
vol. (Oxygen Content 2.7% weight) should not
be used in your Hyundai.
Fuel containing MTBE over 15.0% vol. (Oxygen
Content 2.7% weight) may reduce vehicle per-
formance and produce vapor lock or hard start-
ing.

B010D01A-AAT

Do Not Use Methanol

Fuels containing methanol (wood alcohol) should
not be used in your Hyundai. This type of fuel
can reduce vehicle performance and damage
components of the fuel system.

CAUTION:

o Do not "TOP-OFF" after the first nozzle

shut off when refueling.

o The fuel cap must be tightened at least

3 clicks, otherwise "        " light may ill-
uminate.

CAUTION:

Your Hyundai's New Vehicle Limited Warran-
ty may not cover damage to the fuel system
and any performance problems that are caused
by the use of fuels containing methanol or
fuels containing MTBE (Methyl Tertiary Butyl
Ether) over 15.0% vol. (Oxygen Content 2.7%
weight.)

!

Summary of Contents for 2005 Accent




























































































































































































































Reviews:

No comments

Related manuals for 2005 Accent

Ranger design 5044 Installation Manual preview
5044
Brand: Ranger design Pages: 6
OEM Tools 22505 Operating Instructions And Parts Manual preview
22505
Brand: OEM Tools Pages: 4
Jeep Cherokee 16 1982 Technical & Service Manual preview
Cherokee 16 1982
Brand: Jeep Pages: 1311
Scosche BTFREQ PRO BTFMPD3SR Manual preview
BTFREQ PRO BTFMPD3SR
Brand: Scosche Pages: 16
JANE StrataPlatform Instructions Manual preview
StrataPlatform
Brand: JANE Pages: 58
National Cycle Quantum Wash'n'Wipe N30208 Assembly Instructions And Owner'S Manual preview
Quantum Wash'n'Wipe N30208
Brand: National Cycle Pages: 12
A-Tach Mounts 50232 Instructions preview
50232
Brand: A-Tach Mounts Pages: 2
Menabo KIT+1 MERAK Fitting Instructions Manual preview
KIT+1 MERAK
Brand: Menabo Pages: 8
Kolpin 1466 Product Instructions preview
1466
Brand: Kolpin Pages: 6
APS iBoard IB-R159 Manual preview
iBoard IB-R159
Brand: APS Pages: 4
Nugent Tipper Remote Kit User Manual preview
Tipper Remote Kit
Brand: Nugent Pages: 21
Black Horse Off Road TR-JECOOE Installation Instructions preview
TR-JECOOE
Brand: Black Horse Off Road Pages: 3
Buick Enclave Owner'S Manual preview
Enclave
Brand: Buick Pages: 394
Metra Electronics 95-7322 Installation Instructions Manual preview
95-7322
Brand: Metra Electronics Pages: 16
FAAFTECH FT-RC-RN Installation Manual preview
FT-RC-RN
Brand: FAAFTECH Pages: 2
Rally Armor IMF63 Installation Instruction preview
IMF63
Brand: Rally Armor Pages: 4
RAWLINK 36772 Instruction Manual preview
36772
Brand: RAWLINK Pages: 25
Genesis GV60 2023 Owner'S Manual preview
GV60 2023
Brand: Genesis Pages: 690

Brands by name

Popular brands

Load more brands