Hyster A1.3-1.5XNT, Service Manual

Page: 65 / 124

Table 13. Diagnostic Submenu Icons (Continued)
Icon Description
Battery Voltage
Indicator Icon
5 V Supply Voltage
Indicator Icon
12 V Supply Voltage
Indicator Icon
Steering Position Sensors Submenu
Table 13. Diagnostic Submenu Icons (Continued)
Icon Description
Forklift Truck Enabled
Icon
Forklift Truck Disabled
Icon
Steering Wheel Position
Sensor Icon
Axle Position Sensor
Icon. Visible only on
trucks equipped with
the dual traction
controllers or the Steer
Synchronization feature.
Operating Screen
INTRODUCTION
The Operating Screen, shown in Figure 9, is located
on the Display Panel along with the numeric keys
and control keys. At key-on, the Password Screen is
the first screen displayed unless Operator Pass-
words are disabled. After a valid password is en-
tered, the Operating Screen appears by default.
The Operating Screen uses small graphic images,
called icons, to provide continuous feedback to the
lift truck operator. This feedback includes perform-
ance settings, status and warning messages, and
essential truck operating information. The Operat-
ing Screen is active at all times during normal lift
truck operation.
2200 SRM 1336 Operating Screen
59