E-HYDRAULIC CONTROLLER VERSIONS
NOTE:
The manufacturer's hardware and software
versions may not match the hardware and software
versions shown on the device's exterior label.
Use this submenu to view the manufacturer's inter-
nal hardware and software versions of the E-Hy-
draulic Input Controller.
NOTE:
This item is visible only on trucks equipped
with E-Hydraulics.
The manufacturer's hardware and manufacturer's
software version information is presented on the
screen as shown in Figure 45.
PUMP MOTOR CONTROLLER VERSIONS
NOTE:
The manufacturer's hardware and software
versions may not match the hardware and software
versions shown on the device's exterior label.
Use this submenu to view the manufacturer's inter-
nal hardware and software versions of the Pump
Motor Controller. The manufacturer's hardware
and manufacturer's software version information is
presented on the screen as shown in Figure 45.
TRACTION MOTOR CONTROLLER 1
VERSIONS
NOTE:
The manufacturer's hardware and software
versions may not match the hardware and software
versions shown on the device's exterior label.
Use this submenu to view the manufacturer's inter-
nal hardware and software versions of Traction Mo-
tor Controller 1.
NOTE:
If the truck is equipped with two traction
motors, this submenu displays the versions for the
right side traction motor only.
The manufacturer's hardware and manufacturer's
software version information is presented on the
screen as shown in Figure 45.
TRACTION MOTOR CONTROLLER 2
VERSIONS
NOTE:
The manufacturer's hardware and software
versions may not match the hardware and software
versions shown on the device's exterior label.
Use this submenu to view the manufacturer's inter-
nal hardware and software versions of Traction Mo-
tor Controller 2. Traction Motor Controller 2 con-
trols the left side traction motor.
NOTE:
The Status Menu displays this item only if
the CDF configuration indicates dual traction mo-
tors are present.
The manufacturer's hardware and manufacturer's
software version information is presented on the
screen as shown in Figure 45.
LIGHT CONTROLLER VERSIONS
NOTE:
The manufacturer's hardware and software
versions may not match the hardware and software
versions shown on the device's exterior label.
Use this submenu to view the manufacturer's inter-
nal hardware and software versions of the Light
Controller. The manufacturer's hardware and man-
ufacturer's software version information is presen-
ted on the screen as shown in Figure 45.
IMPACT SENSOR VERSIONS
NOTE:
The manufacturer's hardware and software
versions may not match the hardware and software
versions shown on the device's exterior label.
Use this submenu to view the manufacturer's inter-
nal hardware and software versions of the Impact
Sensor.
NOTE:
If the truck is not equipped with an Impact
Sensor, this submenu is not displayed.
The manufacturer's hardware and manufacturer's
software version information is presented on the
screen as shown in Figure 45.
Truck Setup Menu
2200 SRM 1336
94
Summary of Contents for A1.3-1.5XNT
