Hypertherm EcoSift, Operator'S Manual

Page: 70 / 188

Preventive maintenance
Preventive main
tenance
70 EcoSift Operator Manual 809500
Examine the EcoSift unit
Do this task when the EcoSift is running.
1. Examine the machine unit for leaks, deterioration, or damage.
2. Examine the pipes, the hoses, the fittings, and the connections for leaks, deterioration, or damage.
Identify the source of a leak and correct the problem.
3. Make sure that all connections and fasteners are tight, including locking devices, latches, bolts, hoses, and
fittings.
4. Examine the recycled-abrasive collection bag for deterioration or damage.
5. Replace the recycled-abrasive collection bag, if necessary. Refer to
Replace the recycled-abrasive
collection bag
on page 71.
Examine the EcoSift hopper
Do this task when the EcoSift is operating.
1. Examine the hopper for leaks, deterioration, or damage.
2. Examine the pipes, the hoses, the fittings, and the connections for leaks, deterioration, or damage.
Identify the source of a leak and correct the problem.
3. Make sure that the EcoSift hopper contains sufficient abrasive to recycle.
CAUTION
Do not touch hot surfaces.
Repair or replace parts identified in the preventive maintenance schedule or if the parts are
defective, deteriorated, corroded, or damaged.
Repair or replace parts identified in the preventive maintenance schedule or if the parts are
defective, deteriorated, corroded, or damaged.