Hypertherm EcoSift, Operator'S Manual

Page: 168 / 188

Installation
Inst
allation
168 EcoSift Operator Manual 809500
Do the first startup
Examine the EcoSift before operation
 Look for leaks, deterioration, damage, or other conditions that can interfere with operation.
 Make sure that all connections and fasteners are tight, including locking devices, latches, bolts, hoses, and
fittings.
 Make sure that all warning decals are maintained so that they are visible and can be read. Do not cover,
block, or remove any warnings, cautions, or instructional materials.
 Make sure that the EcoSift hopper contains sufficient abrasive to recycle.
 Clean the display on the operator interface. Wipe dust and debris off carefully with a clean, lint-free towel.
WARNING
Only approved personnel can operate, maintain, and repair this machinery. Refer to
Training
on
page 67 for more information.
WARNING
Do not operate this machinery without the access covers and all other safety devices installed. Do
not remove guards while the unit is operating.
WARNING
Wear approved personal protective equipment such as goggles, gloves, and respirators when
operating or working near this machinery. Refer to
Personal protective equipment
on page SC-20.
CAUTION
If a water line, a fitting, a hose, or a valve might be frozen, do not operate the system. Thaw the
system until water moves freely through the entire water circuit.
CAUTION
Do not turn ON the EcoSift without abrasive in the dryer box.
Remove all tools and materials from the work area before starting the EcoSift.
Repair or replace parts identified in the preventive maintenance schedule or if the parts are
defective, deteriorated, corroded, or damaged.
Do not spray any liquid directly onto the touchscreen.
Do not use abrasive cloths, paper towels, tissue paper, or rough rags, which can scratch the
touchscreen.
Do not use cleaners that contain acetone, ammonia, or alcohol, which are found in commercial
and household glass cleaners.
Use a cleaner made for touchscreens or use a 1:1 solution of distilled water and white vinegar
for stubborn grease and oil smudges.