manualshive.com logo in svg

Hypertherm EcoSift, Operator'S Manual

Share
Download
Hypertherm EcoSift Operator'S Manual Download Page 142

Installation

Inst

allation

142

EcoSift

Operator Manual

809500

Receive and unpack the equipment

1.

Unload boxes, crates, and pallets with a crane or a forklift. Use slings if necessary.

2.

Examine containers, crates, and pallets for cracks or damage.

3.

Remove the system from the shipping crates and pallets.

4.

Examine the equipment to make sure that it was not damaged during shipping.

If the system is damaged, a claim must be filed with the carrier.

5.

Make sure that the delivery and shipping documents agree with the system that was ordered and what was 
received. Report shortages or damages to the OEM or to Hypertherm Waterjet no more than 10 days after 
receipt of the system.

EcoSift unit 

Technical drawings for the system are found inside the electrical enclosure.

EcoSift hopper

The hopper arrives with all of the internal plumbing and external connections installed.

WARNING

• Lifting must be done by a trained operator.

• Obey all work site-safety requirements, the safety instructions for the lifting equipment, and the 

safety information in this manual.

• Misuse of lifting equipment can cause the load to become unstable, which can cause property 

damage, personal injury, or death.

Summary of Contents for EcoSift





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands