HygroMatik Basic-DS, Manual

Page: 16 / 102

SPA
Page 16
Delivery System Off
By pressing the key once, the Essence Injector Parameter is set
continuously to off . This is indicated in the display by an e and results
in no essence delivery into the steam bath.
4.1.4 Light - Function
Light (on / off)
In the factory, the light in the steam cabin is switched off for initial oper-
ation. This is indicated by an
l in the display. By pressing the key
once, the cabin light is switched on.
The display now shows an L to indicate continuous operation of the
light. If an L is present in the 1st line of the display, the cabin light is
operating.
4.2 Overview of Steam Bath Operation and Installa-
tion
The necessary steam for the operation of the steam bath is supplied by
the HygroMatik Steam Generator. The recorded temperature in the
steam bath is the only control variable for controlling steam production.
At the default setting, the steam bath achieves a temperature of about
45°C/113°F at 100% relative humidity. A steam bath air supply fan may
be used to deliver fresh air, and an exhaust fan to remove warm air
from the steam bath, in order to ensure continuous steam supply and a
stable temperature control.
Heat-Up Phase:
Steam is supplied to the still cold steam bath, increasing the relative
humidity to 100% at an initially constant temperature. Subsequent
steam delivery then increases the temperature; the relative humidity
remains at 100%.
Operating Phase:
When the desired temperature (plus hysteresis) is reached, steam pro-
duction is interrupted. If the steam bath temperature falls below the
desired value, steam is again delivered into the cabin.
The optional HygroMatik steam bath driving functions for light, fans
and essence injection may be ordered in 24 V or 230 V versions. How-
ever, for installation within the steam cabin, only safe low voltage is
allowed.
Steam Bath
45 °C
°C F e l
Steam Bath
45 °C
°C F e l
Steam Bath L
45 °C
°C F e L
Please note