Error messages / Troubleshooting
FluidAqua Mobil - FAM10/15-P
en(us)
Page 113 / 124
BEWA FAM10-15-P 4052078 en-us 2015-11-05.doc
2015-11-05
34. Oil pan too full -> drain oil pan and seal leak
Cause:
The float switch in the tray was actuated.
The message appears on the display after 1.8 seconds,
and the FAM switches itself off.
Remedy: Perform
the
following
steps:
Step
Description
1.
Message:
34. Oil pan too full -> drain oil pan and seal leak.
2.
Empty
the
oil pan on the FAM.
3.
Check the FAM for any leaks and eliminate any that are found.
4.
Actuate ESC key and reset failure with the F3 key.
5.
Restart the FAM by pressing the F1 key.
->a. The fault is repeated.
-> proceed to Step 7.
6.
->b. The fault is not repeated.
-> proceed to Step 8.
7.
Check the float switch in the
oil pan. See page 86.
Check the supply line to the
float switch. If necessary,
replace them.
-> proceed to Step 4.
8.
The fault is repaired.
Summary of Contents for FluidAqua Mobil FAM 10-P
Page 123: ......
