-------------------------------------------------------------------------------------------------- Non-Contact Tonometer HNT-1/1P 45
(2)
Press each item to test the item.
(3)
Select “Pass” or “Fail” button for each item.
(4)
Press the
“Print” button to print the test results.
(5)
The “Reset” button initializes all items.
4-1-13. Log Mode
[Purpose
]
To check logs written.
[Execution]
※
Only if the f-ram detected in the initial sequence while booting, this mode is
available.
(1)
Select the
“Log Mode” button at Engineer Mode.
(2)
If the f-ram detected while booting, the following items are displayed on LCD.
