-------------------------------------------------------------------------------------------------- Non-Contact Tonometer HNT-1/1P 37
C.
PWM BASE(Y-UP)
: up side on Y-axis.
D.
PWM BASE(Y-DN)
: down side on Y-axis.
E.
PWM BASE(Z-FR)
: front side on Z-axis.
F.
PWM BASE(Z-RR)
: rear side on Z-axis.
(3)
Select an DIST CONST of each direction, which decides deceleration range of
Auto Focus motor speed. If this value is increased, it seems that Auto Focus
movement to that direction is more slow.
A.
DIST CONST(X-LF)
: left side on X-axis.
B.
DIST CONST(X-RG)
: right side on X-axis.
C.
DIST CONST(Y-UP)
: up side on Y-axis.
D.
DIST CONST(Y-DN)
: down side on Y-axis.
E.
DIST CONST(Z-FR)
: front side on Z-axis.
F.
DIST CONST(Z-RR)
: rear side on Z-axis.
(4)
Press
“Clear” button to reset all changes to default settings.
(5)
Press
“Save” button to save the current settings.
4-1-7. Target Dist Setup
[Purpose]
Decides the working range of auto tracking
[Setup Procedure]
(1)
Enter into Target Dist Setup Mode at Engineer Mode
(2)
Select an item to change target distance of each direction, which decides the
working range of auto tracking. If its value is more large, auto tracking is
triggered in more broad area around focus center.
