12 Non-Contact Tonometer HNT-1/1P ------------------------------------------------------------------------------------------------
of flammable, explosive, or volatile solvent such as alcohol, benzene or similar chemicals.
4.
This product may malfunction due to electromagnetic waves caused by portable personal telephones,
transceivers, radio-controlled toys, etc. Be sure to avoid having objects such as, which affect this product,
brought near the product.
5.
The device should neither be kept nor installed in the place with high humidity. For the optimal operation,
the humidity should be at the range of 30%~90%. The machine should not be exposed to the place
where water splashes, drips or sprays.
6.
Do not install the device in an eviroment where cotaminants such as corrosive gas, acid, or salt is
containedin the air.
7.
Do not place the substance or material on the top of the device.
8.
In case of any presence of smoke, spark or abnormal noise/smell from the machine, please power off
immediately and pull out the plug.
9.
As this device use lithium battery, the reckless abandon of the machine itself or the lithium battery can
cause the environmental pollution. Please contact to the professional waste disposal company.
10.
When disposing of the device and / or part, follow local regulations for disposal and recycling.
11.
The equipment must be operated only by a, or under direct supervision of properly trained and qualified
person/s such as ophthalmologist.
12.
Modifications of this equipment may o
nly be carried out by Huvitz’s service technicians or other
authorized persons.
13.
Be sure to check the safety distance before measurement. If the safety distance is not secured, may
touch and injury the patient’s eye.
14.
Customer maintenance of this equipment may only be performed as stated in the User’s Manual and
Service Manual. Any additional maintenance may only be performed by Huvitz’s service technicians or
other authorized persons.
15.
The manufacturer is only responsible for effects on safety, reliability, and performance of this equipment
when the following requirements are fulfilled: (1) The electrical installation in the respective room
corresponds to the specifications stated in this manual and (2) This equipment is used, operated and
maintained according to this manual and Service Manual.
16.
The manufacturer is not liable for damage caused by unauthorized tampering with the device(s). Such
tampering will forfeit any rights to claim under warranty.
17.
The equipment may
only be used together with accessories supplied by Huvitz’s. If the customer makes
use of other accessories, use them only if there are usability under technical safety aspects has been
proved and confirmed by Huvitz or the manufacturer of the accessory.
18.
Only persons who have undergone proper training and instructions are authorized to install, use, operate,
and maintain this equipment.
19.
User’s manual or service manual should be kept in the place where the persons in chare of operation